HMCP400K5C - 400Amp Motor Circuit Protector
- 400 Amp
- 600VAC
- 3 Pole
Purchase Options: New In Box
HMCP400K5C - 400Amp Motor Circuit Protector Description
HMCP400K5C - 400Amp Motor Circuit Protector
The Eaton HMCP400K5C is a 400A, three-pole Series C motor circuit protector designed for motor protection applications requiring a Frame J-K device. It has a 1000–2000A magnetic trip range and is rated for a maximum of 600V AC or 250V DC. For anyone replacing an existing motor circuit protector, those details matter. The unit is also UL Listed and CSA Certified. When you're trying to match an existing HMCP400K5C, it's worth checking the full catalog number, including the frame, poles, voltage, amperage, and magnetic trip range, rather than relying on the 400A rating alone. Properly applied within its specified ratings, this motor circuit protector is built to last.
Key Features and Benefits
- 400A rating for motor protection applications requiring this specific amperage.
- Three-pole design for compatible equipment and installations.
- 1000–2000A magnetic trip range, an important detail when matching an existing motor circuit protector.
- Uses the Frame J-K configuration.
- Part of the Eaton Series C product family.
- Rated for a maximum of 600V AC and 250V DC.
- Equipped with line and load terminals and non-aluminum terminal material.
- Clearly defined dimensions make it easier to check physical fit against an existing installation.
Technical Specifications
-
Manufacturer: Eaton
-
Catalog Number: HMCP400K5C
-
UPC: 786679342541
-
Product Type: Molded case circuit breaker accessory
-
Type: Motor circuit protector
-
Series: Series C
-
Amperage Rating: 400 A
-
Frame Size: Frame J-K
-
Number of Poles: Three-pole
-
Magnetic Trip Range: 1000–2000 A
-
Maximum Voltage: 600 V AC / 250 V DC
-
Terminals: Line and load
-
Terminal Material: Non-aluminum
-
Height: 10.13 in
-
Width: 5.5 in
-
Length/Depth: 4.1 in
-
Weight: 11.5 lb
Material Compliance and Certifications
The HMCP400K5C is UL Listed and CSA Certified. The manufacturer's supplied information directs users to contact the manufacturer for additional compliance details. If an installation has specific code, certification, or compliance requirements, those requirements should be checked against the product specifications before installation.
Where It Works Best
The Eaton HMCP400K5C makes the most sense in motor protection applications already designed around its particular specifications. That means installations calling for a 400A, three-pole, Frame J-K Series C motor circuit protector with a 1000–2000A magnetic trip range.
It can also be a suitable form, fit, and functional replacement in compatible legacy equipment when those specifications match the existing device. Before making that determination, check more than the amperage stamped on the unit. Catalog number, frame size, pole count, magnetic trip range, voltage rating, terminal arrangement, and physical dimensions should all conform to the equipment requirements.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:5.5
- Height:10.13
- Depth:4.1
- Poles:3
- Amperes:400
- A.I.C. Rating & Volts:600VAC
- Type:HMCP
- Sub-Category:MOTOR CIRCUIT PROTECTOR
- Approx Dimensions:5.50"W x 10.13"H x 4.10"D
- Additional Notes:Cam Settings: (A) 77.0 - 86.5; (B) 86.6 - 96.1; (C) 96.2 - 105.7; (D) 105.8 - 115.3; (E) 115.4 - 124.9; (F) 125.0 - 134.6; (G) 134.7 - 144.2; (H) 144.3 - 153.8; (I) 153.9 - 163.3 . K Frame Body. Includes Line and Load-Side Terminal - discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).