HMCP400R5C - 400Amp Motor Circuit Protector
- 400 Amp
- 600VAC
- 3 Pole
Purchase Options: Refurbished
HMCP400R5C - 400Amp Motor Circuit Protector Description
HMCP400R5C - 400Amp Motor Circuit Protector
The HMCP400R5C is an Eaton Series C motor circuit protector rated for 400 amps and built for three-phase motor protection. With its J-K frame, three-pole design, and defined voltage and trip ratings, it is a practical replacement when your existing system already uses this Eaton HMCP configuration.
For replacement work, the details are important. The HMCP400R5C has a 1750–3500 amp magnetic trip range, helping protect compatible motor circuits from high-current faults. Its three-pole design protects all three phases with a single coordinated device.
Key Features and Benefits
- 400 Amp motor circuit protector for compatible motor applications
- Three-pole design for three-phase motor circuits
- Eaton Series C construction
- J-K frame configuration
- 1750–3500 A magnetic trip range
- Maximum rating of 600V AC and 250V DC
- Line and load terminals
- Non-aluminum terminal material
- Suitable for replacement applications requiring matching form, fit, and ratings
- Helps maintain the existing layout of compatible Eaton equipment
Technical Specifications
-
Catalog Number: HMCP400R5C
-
Manufacturer: Eaton
-
Product Type: Molded case circuit breaker accessory/motor protection
-
Type: Motor circuit protector
-
Series: Series C
-
Amperage Rating: 400 A
-
Number of Poles: 3
-
Frame Size: J-K Frame
-
Magnetic Trip Range: 1750–3500 A
-
Maximum AC Voltage: 600V
-
Maximum DC Voltage: 250V DC
-
Terminals: Line and load
-
Terminal Material: Non-aluminum
-
UPC: 786679342602
-
Product Length/Depth: 14 in
-
Product Height: 6 in
-
Product Width: 7 in
-
Product Weight: 15 lb
Material Compliance and Certifications
The Eaton HMCP400R5C motor circuit protector is UL Listed and CSA Certified. These listings can be important when replacing components in equipment that requires specific certifications and electrical ratings.
Motor protection equipment should be selected based on the complete application, not amperage alone. Qualified electrical personnel should handle installation and servicing in accordance with applicable codes, equipment instructions, and site requirements.
Where It Works Best
- Motor circuits requiring a 400A motor circuit protector
- Compatible Eaton Series C equipment
- Applications designed for a J-K frame
- Three-phase systems needing a three-pole protector
- Systems operating within the 600V AC or 250V DC maximum rating
- Applications requiring a 1750–3500A magnetic trip range
- Maintenance and replacement work on existing motor control equipment
- Installations where matching the original form, fit, ratings, and terminal configuration matters
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:5.5
- Height:10.13
- Depth:4.1
- Poles:3
- Amperes:400
- A.I.C. Rating & Volts:600VAC
- Type:HMCP
- Sub-Category:MOTOR CIRCUIT PROTECTOR
- Approx Dimensions:5.50"W x 10.13"H x 4.10"D
- Additional Notes:Cam Settings: (A) 134.7 - 151.5; (B) 151.6 - 168.4; (C) 168.5 - 185.3; (D) 185.4 - 201.9; (E) 202.0 - 218.8; (F) 218.9 - 235.7; (G) 235.8 - 252.6; (H) 252.7 - 269.2; (I) 269.3 - 285.7 . K Frame Body. Includes Line and Load-Side Terminal - discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE ® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).