HMCPE100T3C - 100Amp Motor Circuit Protector
- 100 Amp
- 600VAC
- 3 Pole
Purchase Options: New In Box
HMCPE100T3C - 100Amp Motor Circuit Protector Description
HMCPE100T3C - 100Amp Motor Circuit Protector
When you’re replacing a motor circuit protector, getting the details right matters. The Eaton HMCPE100T3C is a 100-amp, three-pole motor circuit protector from Eaton’s Series G line, designed around the J-K frame. It has a T98 trip type, a magnetic trip range of 500 to 1500 amps, and a 480V voltage rating, with a maximum voltage specification of 600Y/347V. Those specifications make the HMCPE100T3C a practical choice for maintaining equipment that requires this configuration.
Key Features and Benefits
- 100A rating for motor protection applications requiring this amperage
- Three-pole design for compatible three-phase equipment
- 480V rated, with a maximum voltage specification of 600Y/347V
- 500–1500A magnetic trip range
- T98 trip type
- Designed for the J-K frame
- Part of Eaton's Series G family
- Uses non-aluminum terminal material
Technical Specifications
-
Manufacturer: Eaton
-
Catalog Number: HMCPE100T3C
-
Product Type: Molded case circuit breaker accessory
-
Type: Motor circuit protector
-
Series: Series G
-
Frame Size: J-K
-
Amperage Rating: 100A
-
Poles: 3
-
Voltage Rating: 480V
-
Maximum Voltage: 600Y/347V
-
Trip Type: T98
-
Magnetic Trip Range: 500–1500A
-
Terminal Material: Non-aluminum
-
Height: 5.5 in
-
Width: 3 in
-
Length/Depth: 6.5 in
-
Weight: 3 lb
-
UPC: 786679113707
Material Compliance and Certifications
The HMCPE100T3C is UL Listed and CSA Certified. Its terminals use non-aluminum material.
As with any electrical replacement component, certification is only part of the compatibility check. The catalog number, electrical ratings, frame, trip characteristics, and intended application should all agree with the requirements of the equipment in which the protector will be installed.
Where It Works Best
The HMCPE100T3C is best suited to motor protection equipment designed for a 100A, three-pole Eaton Series G motor circuit protector using the J-K frame and T98 trip configuration. It's especially relevant for maintenance and replacement work where preserving the original component's form, fit, and function is the priority.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:3.0
- Height:5.5
- Depth:3.3
- Poles:3
- Amperes:100
- A.I.C. Rating & Volts:600VAC
- Type:HMCPE
- Sub-Category:MOTOR CIRCUIT PROTECTOR
- Approx Dimensions:3.00"W x 5.50"L x 3.30"D
- Additional Notes:Motor Full Load Current Amperes Cam Settings: (A) 38.4 - 46.0; (B) 57.6 - 65.2; (C) 76.9 - 84.5; (D) *; (E) *; (F) *. EG Frame. MCP Trip Setting: 500A-1500A . Includes Line and Load-Side Terminal. "Settings above 10 x In are for special application. Where the ampere rating of the disconnecting means cannot be less than 115% of the motor full load ampere rating" - Direct quote from Eaton Cutler Hammer catalog page. - discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).