JDB3250 - 250A Circuit Breaker
- 250 Amp
- 18k @ 600VAC; 35k @ 480VAC; 65k @ 240VAC
- 3 Pole
Purchase Options: New In Box
JDB3250 - 250A Circuit Breaker Description
JDB3250 - 250A Circuit Breaker
For the JDB3250, the electrical ratings provide a useful starting point for confirming your replacement: 250A, three-pole, 600VAC/250VDC, 65 kAIC at 240VAC, and 35 kAIC at 480VAC. This Eaton Series C molded-case circuit breaker uses a J frame, JDB breaker type, and T186 trip type, and is supplied as a complete breaker. Aluminum terminals are included on both the line and load sides, an important detail when comparing the connection arrangement with equipment already in service. The JDB3250 is built to last, while selecting it for existing or legacy equipment still comes down to a careful form, fit, and functional comparison of the complete specification set.
Key Features and Benefits
- 250A, three-pole configuration provides clearly defined electrical characteristics for replacement matching.
- JDB breaker type with a J frame helps narrow compatibility with existing electrical equipment.
- Uses the manufacturer-specified T186 trip type.
- Supplied as a complete Series C molded case circuit breaker.
- Aluminum line and load terminals are included, providing a known termination configuration for comparison with the existing installation.
- Rated for 600VAC and 250VDC operation at 50–60 Hz.
- UL Listed according to the supplied manufacturer specifications.
Technical Specifications
-
Catalog Number: JDB3250
-
Manufacturer: Eaton
-
Product Name: Series C complete molded case circuit breaker
-
Product Type: Molded case circuit breaker
-
Series: Series C
-
Circuit Breaker Type: JDB
-
Frame: J
-
Circuit Breaker Frame Type: Complete breaker
-
Amperage Rating: 250A
-
Number of Poles: Three-pole
-
Voltage Rating: 600VAC, 250VDC
-
Frequency Rating: 50–60 Hz
-
Trip Type: T186
-
Interrupt Rating at 240VAC: 65 kAIC
-
Interrupt Rating at 480VAC: 35 kAIC
-
Terminals: Line and load
-
Terminal Material: Aluminum
-
Product Width: 4.13 in.
-
Product Height: 4.13 in.
-
Product Length / Depth: 4.06 in.
-
Product Weight: 9.22 lb
-
UPC: 786679516348
-
Certification: UL Listed
Material Compliance and Certifications
The JDB3250 is UL Listed in accordance with the supplied manufacturer specifications. No additional material or environmental compliance information was provided for this catalog number; therefore, no additional certifications or compliance claims should be assumed.
Where It Works Best
The JDB3250 250A circuit breaker is suited to compatible existing and legacy electrical equipment that specifically requires a three-pole Series C JDB breaker with a J frame and T186 trip type. Because this model includes aluminum terminals on both the line and load sides, the existing conductor and termination requirements should be checked during the compatibility review.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:4.13
- Height:10.0
- Depth:4.06
- Poles:3
- Amperes:250
- A.I.C. Rating & Volts:18k @ 600VAC; 35k @ 480VAC; 65k @ 240VAC
- Type:JDB
- Approx Dimensions:4.13"W x 10.00"L x 4.06"D
- Additional Notes:40°C, J-Frame, HACR Rated, Molded Case, Thermal Magnetic Circuit Breaker with Non-Interchangeable Trip Unit. Includes Standard Line and Load-Side Lug Terminals - discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).