PDG21M0050TFFL - 50 Amp Circuit Breaker

PDG21M0050TFFL - 50 Amp Circuit Breaker

Looking for the Eaton PDG21M0050TFFL? This Global Rated Power Defense molded-case circuit breaker is a Frame 2, 1-pole breaker rated at 50 amps, with an interrupting rating of 65 kA at 277 VAC. It comes with a fixed trip and load lugs, making it a straightforward choice when those specifications match the electrical equipment you're working with. The breaker measures approximately 1.38 inches high, 6 inches wide, and 3.5 inches deep. Whether you're replacing an existing breaker or working on a compatible electrical system, the important thing is getting the details right. Check the part number, amperage, number of poles, interrupting rating, trip type, and dimensions against your equipment requirements before installation.

Key Features and Benefits

• 50-amp rating for applications requiring 50A circuit protection.
• 1-pole design for compatible single-pole applications.
• 65kA interrupting rating at 277 VAC for handling high available fault-current levels within the breaker's specified rating.
• Fixed trip provides predefined trip characteristics without adjustable settings.
• Load lugs included for connection to compatible equipment.
• Frame 2 construction from the Global Rated Power Defense family.
• At 1.38" H x 6.0" W x 3.5" D, its dimensions are easy to compare with an existing breaker or equipment specification.
  

Technical Specifications

• Manufacturer: Eaton
  
• Part Number: PDG21M0050TFFL
  
• Product Family: Global Rated Power Defense
  
• Breaker Type: Molded Case Circuit Breaker
  
• Frame: Frame 2
  
• Poles: 1
  
• Amperage: 50A
  
• A.I.C. Rating: 65kA at 277 VAC
  
• Trip: Fixed
  
• Lugs: Load Lugs
  
• Height: 1.38 in.
  
• Width: 6.0 in.
  
• Depth: 3.5 in.
  

Material Compliance and Certifications

• If your project has specific certification or material-compliance requirements, check the current manufacturer documentation and the markings on the breaker before installation. Those requirements can vary by product configuration, manufacturing revision, equipment, and jurisdiction. We don't recommend assuming a particular certification or compliance status unless it is confirmed for the exact PDG21M0050TFFL being used.

Where It Works Best

• The PDG21M0050TFFL is best suited to compatible commercial and industrial electrical applications requiring a 50A, 1-pole molded-case circuit breaker with a 65kA interrupting rating at 277 VAC. It can be a good fit for maintenance and replacement work when the existing equipment requires this particular Frame 2 configuration.
• If you're replacing a breaker, don't rely on amperage alone. Compare the part number, pole count, voltage, A.I.C. rating, trip configuration, lug arrangement, frame, and physical dimensions with the breaker being replaced and the requirements of the electrical equipment. A breaker that looks similar isn't necessarily interchangeable, so proper specification matching matters.