PDG21M0060TFFL - 60Amp Circuit Breaker

PDG21M0060TFFL - 60Amp Circuit Breaker

When you're replacing a circuit breaker, getting the details right matters. The Eaton PDG21M0060TFFL is a 60A, 1-pole molded case circuit breaker from the Power Defense family. It uses a Frame 2 design and carries an interrupting rating of 65 kA at 277 VAC, making it a good match for compatible applications that require higher fault-current protection. This breaker has a fixed trip and is supplied with load lugs, so there's no need to sort through unnecessary adjustment options when the application calls for this specific configuration. Size can be just as important when you're matching an existing breaker: the PDG21M0060TFFL measures approximately 1.38 inches high, 6 inches wide, and 3.5 inches deep. If you're working on a replacement, retrofit, or maintenance project, compare the catalog number and electrical ratings to those of the breaker being replaced and to the equipment's requirements. Amperage alone isn't enough to determine compatibility.

Key Features and Benefits

• 60A rating for applications requiring 60-amp circuit protection
• Single-pole configuration for compatible one-pole applications
• 65kA interrupting rating at 277 VAC for substantial fault-current interrupting capability
• Fixed trip for a straightforward, defined trip configuration
• Load lugs included for the specified load-side connection
• Part of the Power Defense Frame 2 molded case circuit breaker family
• Compact dimensions make it easier to compare the breaker with an existing installation
• Clearly defined ratings help take some of the guesswork out of finding the correct replacement breaker
  

Technical Specifications

• Manufacturer: Eaton
  
• Part Number: PDG21M0060TFFL
  
• Product Family: Power Defense
  
• Breaker Type: Molded Case Circuit Breaker (MCCB)
  
• Frame: Frame 2
  
• Poles: 1
  
• Amperage: 60A
  
• A.I.C. Rating: 65kA at 277 VAC
  
• Trip: Fixed
  
• Connection: Load Lugs
  
• Height: 1.38 in.
  
• Width: 6.0 in.
  
• Depth: 3.5 in.
  

Material Compliance and Certifications

• The PDG21M0060TFFL is part of Eaton's globally rated Power Defense molded-case circuit breaker line. Exact certification and material-compliance requirements can vary by configuration and application, so these details shouldn't be assumed from the product family alone. Check the markings on the breaker and the applicable manufacturer's documentation when a particular approval or material-compliance standard is required for the job.

Where It Works Best

• The Eaton PDG21M0060TFFL makes the most sense when the equipment calls for this particular combination: 60 amps, one-pole, fixed-trip, load lugs, and a 65 kA interrupting rating at 277 VAC. That can include compatible replacement, maintenance, retrofit, and electrical distribution applications.
• For replacement work, start with the catalog number whenever possible. Then check the ratings and physical configuration. A breaker with the same 60A rating isn't automatically interchangeable—the pole count, voltage, interrupting rating, trip type, connections, dimensions, and equipment compatibility all need to line up. When those requirements point to the PDG21M0060TFFL, you know you're looking at the right set of specifications.