B215EGHH - 15A 30mA GFCI Circuit Breaker
- 15 Amp
- 65kA @ 120/240VAC
- 2 Pole
Purchase Options: New In Box
B215EGHH - 15A 30mA GFCI Circuit Breaker Description
B215EGHH - 15A 30mA GFCI Circuit Breaker
When you're replacing a circuit breaker, the details matter. Two breakers may have the same amperage and look nearly identical, yet have very different interrupting capacities, protection functions, or mounting requirements. Choosing the right one means checking more than just the number printed on the handle.
The B215EGHH Circuit Breaker is a 15-amp, 2-pole, Type HBLE2 bolt-on molded-case circuit breaker rated for 120/240V AC. With a 65kA interrupting capacity and 30 mA ground-fault equipment protection, it combines circuit interrupting capability with a ground-fault protection function intended for electrical equipment.
Key Features and Benefits
- 15 Amp Current Rating
- Two-Pole Configuration
- 120/240V AC Voltage Rating
- 65kA Interrupting Capacity
- 30mA Ground Fault Equipment Protection
- Type HBLE2 Identification
- Bolt-On Mounting Design
- Molded Case Construction
- Circuit Interrupting Function
- Existing Electrical System Maintenance
- Accurate Replacement Identification
Technical Specifications
-
Part Number: B215EGHH
-
Circuit Breaker Type: HBLE2
-
Number of Poles: 2
-
Amperage: 15 Amps
-
Voltage Rating: 120/240V AC
-
Interrupting Capacity (A.I.C.): 65kA at 120/240V AC
-
Ground Fault Protection: 30mA Ground Fault Equipment Protection
-
Circuit Interrupting Function: Yes
-
Mounting Style: Bolt-On
-
Construction: Molded Case Circuit Breaker
-
Height: 5.0 inches
-
Width: 2.0 inches
-
Depth: 3.0 inches
-
Overall Dimensions: 5.0" H × 2.0" W × 3.0" D
Material Compliance and Certifications
Electrical components should be selected based on verified specifications, applicable standards, and manufacturer-approved installation requirements. While the B215EGHH is identified as a bolt-on molded case circuit breaker, the supplied information does not establish its specific material composition or third-party certification status.
A molded case design describes the breaker's general construction, but it does not establish the exact materials used in the housing, contacts, or terminals. Likewise, a stated electrical rating should not be taken as proof of a particular certification.
Where It Works Best
The B215EGHH may fit electrical maintenance and replacement situations where the existing equipment requires a 15 Amp, 2-pole, Type HBLE2 bolt-on circuit breaker with 65kA interrupting capacity and 30mA ground-fault equipment protection.
Its specifications may be relevant to the following applications:
- Existing Electrical Panel Maintenance
- Ground Fault Equipment Protection Applications
- Commercial Electrical System Maintenance
- Industrial Electrical Equipment Servicing
- Type HBLE2 Circuit Breaker Replacement
- Bolt-On Circuit Breaker Installations
- Facility Electrical Maintenance
- Existing Electrical System Restoration
- Equipment Protection Circuit Applications
- High Interrupting Capacity Requirements
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Siemens®, I-T-E®, and Murray® are registered trademarks of Siemens AG. Products sold are surplus, used, or refurbished and are NOT supplied by Siemens AG or its affiliates.
Specifications
- Depth:3.0
- Height:5.0
- Width:2.0
- Poles:2
- Amperes:15
- A.I.C. Rating & Volts:65kA @ 120/240VAC
- Type:HBLE2
- Approx Dimensions:2.00"W x 3.75"L x 3.00"D
- Additional Notes:Ground Fault Equipment Protection (30mA) Circuit Interrupting, bolt-on Molded Case Circuit Breaker.
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).