B230EG - 30A 30mA GFCI Circuit Breaker
- 30 Amp
- 10kA @ 120/240VAC
- 2 Pole
Purchase Options: New In Box
B230EG - 30A 30mA GFCI Circuit Breaker Description
B230EG - 30A 30mA GFCI Circuit Breaker
The right circuit breaker does more than match a panel's amperage requirements. It also needs the correct voltage rating, interrupting capacity, mounting configuration, and protective functions. The B230EG Circuit Breaker combines these essential specifications in a 30-amp, two-pole, bolt-on molded case design with a 10kA interrupting capacity at 120/240V AC and 30mA ground-fault equipment protection.
Identified as Type BLE2, the B230EG is intended for applications that require circuit interruption and ground-fault protection for your electrical equipment. Its 30mA ground fault protection function is designed to respond to ground leakage conditions that may indicate an equipment fault. This is an important distinction for electricians and maintenance professionals: 30mA equipment protection is not the same as 5mA GFCI personnel protection and should not be used as a substitute where personnel protection is required.
Key Features and Benefits
- 30 Amp Current Rating
- Two-Pole Configuration
- 120/240V AC Voltage Rating
- 10kA Interrupting Capacity
- 30mA Ground Fault Equipment Protection
- Type BLE2 Identification
- Bolt-On Mounting Configuration
- Molded Case Circuit Breaker Construction
- Circuit Interrupting Function
- Existing Electrical System Maintenance
- Form, Fit, and Functional Replacement
- Built With Lasting Service in Mind
Technical Specifications
-
Part Number: B230EG
-
Product Category: Circuit Breaker
-
Product Type: Molded Case Circuit Breaker with Ground Fault Equipment Protection
-
Breaker Type: BLE2
-
Number of Poles: 2
-
Amperage Rating: 30 Amps
-
Voltage Rating: 120/240V AC
-
Interrupting Capacity (A.I.C.): 10,000 Amps (10kA) at 120/240V AC
-
Ground Fault Protection Threshold: 30mA
-
Ground Fault Protection Application: Equipment Protection
-
Mounting Configuration: Bolt-On
-
Construction: Molded Case
-
Height: 5.0 inches
-
Width: 2.0 inches
-
Depth: 3.0 inches
-
Overall Dimensions: 5.0" H × 2.0" W × 3.0" D
Material Compliance and Certifications
When maintaining an electrical system, accurate specifications and verified equipment compatibility are essential. The B230EG Type BLE2 Circuit Breaker is a bolt-on molded-case breaker with 30mA ground-fault protection. However, the available product information does not independently establish its exact material composition or specific third-party certifications.
Where It Works Best
- Existing Electrical Panel Maintenance
- Ground Fault Equipment Protection Applications
- Commercial Electrical Systems
- Industrial Electrical Equipment Servicing
- Type BLE2 Circuit Breaker Replacement
- Bolt-On Circuit Breaker Installations
- Legacy Electrical System Maintenance
- Electrical Equipment Refurbishment
- Facility Maintenance and Repair
- Form, Fit, and Functional Replacement Projects
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Siemens®, I-T-E®, and Murray® are registered trademarks of Siemens AG. Products sold are surplus, used, or refurbished and are NOT supplied by Siemens AG or its affiliates.
Specifications
- Depth:3.0
- Height:5.0
- Width:2.0
- Poles:2
- Amperes:30
- A.I.C. Rating & Volts:10kA @ 120/240VAC
- Type:BLE2
- Approx Dimensions:2.00"W x 3.75"L x 3.00"D
- Additional Notes:Ground Fault Equipment Protection (30mA) Circuit Interrupting, bolt-on Molded Case Circuit Breaker.
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).