B230EGH - 30A 30mA GFCI Circuit Breaker
- 30 Amp
- 22kA @ 120/240VAC
- 2 Pole
Purchase Options: New In Box
B230EGH - 30A 30mA GFCI Circuit Breaker Description
B230EGH - 30A 30mA GFCI Circuit Breaker
When your electrical system needs maintenance, choosing the right circuit breaker isn't just about matching the amperage. The breaker must also meet the installation's voltage, interrupting capacity, mounting, and protection requirements. The B230EGH Circuit Breaker combines a 30-amp rating, two-pole configuration, 120/240V AC voltage rating, and 22kA interrupting capacity with 30mA ground fault equipment protection.
Identified as a Type BLEH2 bolt-on molded-case circuit breaker, the B230EGH is designed for electrical applications that require circuit interruption and equipment ground-fault protection. Its 30mA ground-fault function is intended to respond to ground-leakage conditions that can indicate an equipment fault. That distinction matters: 30mA ground-fault equipment protection is not equivalent to 5mA GFCI personnel protection and should not be substituted where personnel GFCI protection is required.
Key Features and Benefits
- 30 Amp Current Rating
- Two-Pole Configuration
- 120/240V AC Voltage Rating
- 22kA Interrupting Capacity
- 30mA Ground Fault Equipment Protection
- Type BLEH2 Identification
- Bolt-On Mounting
- Molded Case Construction
- Circuit Interrupting Function
- Form, Fit, and Functional Replacement
- Existing Electrical System Maintenance
- Built With Lasting Service in Mind
Technical Specifications
-
Part Number: B230EGH
-
Product Category: Circuit Breaker
-
Product Type: Molded Case Circuit Breaker with Ground Fault Equipment Protection
-
Breaker Type: BLEH2
-
Number of Poles: 2
-
Amperage Rating: 30 Amps
-
Voltage Rating: 120/240V AC
-
Interrupting Capacity (A.I.C.): 22,000 Amps (22kA) at 120/240V AC
-
Ground Fault Protection: 30mA
-
Ground Fault Protection Application: Equipment Protection
-
Mounting Configuration: Bolt-On
-
Height: 5.0 inches
-
Width: 2.0 inches
-
Depth: 3.0 inches
-
Overall Dimensions: 5.0" H × 2.0" W × 3.0" D
Material Compliance and Certifications
Electrical safety starts with accurate product identification and proper installation. For a replacement circuit breaker, check the amperage, voltage, interrupting rating, mounting configuration, and equipment compatibility. For a ground-fault equipment protection breaker, the specified protection threshold must also match the application.
Before installation, confirm the breaker's markings and manufacturer documentation, including approved equipment applications, conductor requirements, terminal tightening torque, and any ground-fault sensing or neutral-connection requirements.
Where It Works Best
- Existing Electrical Panel Maintenance
- Ground Fault Equipment Protection Applications
- Commercial Electrical Systems
- Industrial Electrical Equipment Maintenance
- Type BLEH2 Circuit Breaker Replacement
- Bolt-On Circuit Breaker Installations
- Legacy Electrical System Servicing
- Electrical Equipment Refurbishment
- Form, Fit, and Functional Replacement Projects
- Facility Maintenance and Repair
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Siemens®, I-T-E®, and Murray® are registered trademarks of Siemens AG. Products sold are surplus, used, or refurbished and are NOT supplied by Siemens AG or its affiliates.
Specifications
- Depth:3.0
- Height:5.0
- Width:2.0
- Poles:2
- Amperes:30
- A.I.C. Rating & Volts:22kA @ 120/240VAC
- Type:BLEH2
- Approx Dimensions:2.00"W x 3.75"L x 3.00"D
- Additional Notes:Ground Fault Equipment Protection (30mA) Circuit Interrupting, bolt-on Molded Case Circuit Breaker.
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).