ED2225 - 225Amp Circuit Breaker
- 225 Amp
- 65k @ 240VAC
- 2 Pole
Purchase Options: New In Box
ED2225 - 225Amp Circuit Breaker Description
ED2225 - 225Amp Circuit Breaker
When you're maintaining an existing electrical distribution system, choosing the correct replacement breaker helps keep everything operating as intended. The Eaton ED2225 Series C Complete Molded Case Circuit Breaker is designed as a form, fit, and functional replacement for compatible Eaton Series C ED-frame applications. With a 225 amp rating, two-pole configuration, and a 65 kAIC interrupt rating at 240 VAC, this breaker helps protect electrical circuits from overloads and short circuits while preserving the original electrical specifications of your system. Its T186 thermal-magnetic trip unit responds to both sustained overloads and fault conditions, while the load-side terminal configuration is designed for use in compatible installations.
Key Features and Benefits
- Designed as a form, fit, and functional replacement for compatible Eaton Series C ED-frame circuit breakers
- 225 amp continuous current rating
- Two-pole molded case circuit breaker
- Rated for 240 VAC and 125 VDC applications
- 65 kAIC interrupt rating at 240 VAC
- T186 thermal-magnetic trip unit helps protect against overloads and short circuits
- Complete breaker with F-frame construction
- Load-side terminal configuration for compatible installations
- Suitable for 50/60 Hz electrical systems
- Built to last for dependable service in compatible electrical distribution equipment
Technical Specifications
-
Manufacturer: Eaton
-
Series: Series C
-
Catalog Number: ED2225
-
Product Type: Complete Molded Case Circuit Breaker
-
Circuit Breaker Type: ED
-
Frame: F Frame
-
Frame Type: Complete Breaker
-
Amperage Rating: 225 A
-
Number of Poles: 2
-
Voltage Rating: 240 VAC, 125 VDC
-
Frequency: 50–60 Hz
-
Interrupt Rating: 65 kAIC at 240 VAC
-
Trip Type: T186 Thermal-Magnetic
-
Terminal Type: Load
-
Dimensions: 3.38 in (L) × 2.75 in (W) × 6.00 in (H)
-
Weight: 2.9 lb
Material Compliance and Certifications
- UL Listed
- Manufactured to meet applicable UL safety requirements
- Covered by Eaton's standard warranty in accordance with the applicable Eaton Selling Policy
Where It Works Best
The Eaton ED2225 is commonly used in compatible commercial, industrial, and institutional electrical distribution systems requiring a 225 amp, two-pole molded case circuit breaker. It is suitable for installation in compatible panelboards, switchboards, motor control equipment, and other power distribution systems designed for Eaton Series C ED-frame breakers. Whether replacing an existing breaker during scheduled maintenance or restoring service after a component failure, the ED2225 helps maintain the original system design, electrical ratings, and compatibility while providing dependable overcurrent protection for compatible applications.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:2.75
- Height:6.0
- Depth:3.38
- Poles:2
- Amperes:225
- A.I.C. Rating & Volts:65k @ 240VAC
- Type:ED
- Approx Dimensions:2.75"W x 6.00"L x 3.38"D
- Additional Notes:Thermal-magnetic circuit breaker with non-interchangeable trip unit. 40°C rated. This item includes load terminals.
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).