EHB2015L - 15Amp Circuit Breaker
- 15 Amp
- 14k @ 480VAC
- 2 Pole
Purchase Options: Refurbished
EHB2015L - 15Amp Circuit Breaker Description
EHB2015L - 15Amp Circuit Breaker
Keeping an older electrical system in service starts with using replacement components that match the original equipment. The EHB2015L is a 2-pole, 15 Amp Type EHB thermal-magnetic circuit breaker designed as a form, fit, and functional replacement for compatible electrical panels manufactured before 1989. If you're servicing an existing panel, matching the breaker's electrical ratings and physical configuration helps maintain the system as it was originally designed.
Inside the breaker, the thermal-magnetic trip mechanism responds to the two most common fault conditions. The thermal element reacts to sustained overloads, while the magnetic element responds quickly to short circuits, helping protect connected circuits and equipment.
Key Features and Benefits
- Designed as a form, fit, and functional replacement for compatible Type EHB circuit breaker applications
- 2-pole, 15 Amp thermal-magnetic circuit breaker
- Thermal-magnetic protection helps guard compatible circuits against overloads and short circuits
- Non-interchangeable trip unit maintains the original breaker configuration
- Rated for operation in ambient temperatures up to 40°C (104°F)
- Includes line and load terminals for installation in compatible equipment
- Designed specifically for electrical panels manufactured before 1989
- Built to last for ongoing maintenance of compatible legacy electrical systems
Technical Specifications
-
Part Number: EHB2015L
-
Type: EHB
-
Product Type: Thermal-Magnetic Circuit Breaker
-
Poles: 2
-
Amperage: 15 Amps
-
Interrupting Rating: 14kA @ 480VAC
-
Trip Unit: Non-Interchangeable
-
Operating Temperature Rating: 40°C (104°F)
-
Terminals Included: Line and Load
-
Panel Compatibility: Designed for panels manufactured before 1989
-
Dimensions:
- Width: 2.75 inches
- Height: 6.00 inches
- Depth: 3.38 inches
-
Approximate Shipping Weight: 4.00 lbs.
Material Compliance and Certifications
- Molded case thermal-magnetic circuit breaker construction
- Rated for 14kA interrupting capacity at 480VAC
- Rated for operation in 40°C (104°F) ambient environments
- Includes factory-installed line and load terminals
- Designed for installation in compatible Type EHB electrical distribution equipment
- Install in accordance with applicable electrical codes and the equipment manufacturer's recommendations
- Always verify breaker type, amperage, voltage rating, pole configuration, and equipment compatibility before installation
Where It Works Best
The EHB2015L is commonly used in commercial, industrial, and institutional facilities that continue to operate compatible Type EHB electrical distribution equipment. It's a good fit for legacy electrical panels manufactured before 1989, where maintaining the original breaker type and configuration is an important part of ongoing maintenance.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:2.75
- Height:6.0
- Depth:3.38
- Poles:2
- Amperes:15
- A.I.C. Rating & Volts:14k @ 480VAC
- Type:EHB
- Approx Dimensions:2.75"W x 6.00"H x 3.38"D
- Additional Notes:Thermal-magnetic circuit breaker with non-interchangeable trip unit. 40°C rated. This item includes line and load terminals. This breaker was designed for panels that were manufactured before 1989
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).