EHC3100 - 100Amp Circuit Breaker
- 100 Amp
- 14k @ 480VAC; 18k @ 240VAC
- 3 Pole
Purchase Options: New Surplus
EHC3100 - 100Amp Circuit Breaker Description
EHC3100 - 100Amp Circuit Breaker
When an existing electrical system needs a replacement breaker, finding one that matches the original equipment is often the most important part of the job. The EHC3100 is a 3-pole, 100 amp thermal-magnetic circuit breaker designed for use with compatible Type EHC electrical distribution systems. Instead of changing your setup or making modifications, this breaker is built to provide the proper form, fit, and function, making it a practical replacement for compatible legacy equipment.
Whether you're replacing a breaker during scheduled maintenance, restoring equipment after a failure, or keeping an older electrical distribution system in service, the EHC3100 offers the ratings and compatibility needed for the job.
Key Features and Benefits
- Designed for compatible Type EHC electrical distribution equipment
- 100 Amp, 3-pole circuit breaker configuration
- Thermal-magnetic trip mechanism helps protect against overloads and short-circuit conditions
- Non-interchangeable trip unit maintains the original breaker configuration
- Rated for operation in 40°C ambient environments
- Includes load terminals for compatible installations
- Designed to provide the proper form, fit, and function in replacement applications
- Built to last for dependable service in properly maintained electrical systems
Technical Specifications
-
Part Number: EHC3100
-
Type: EHC
-
Circuit Breaker Style: Thermal-Magnetic
-
Poles: 3
-
Amperage: 100 Amps
-
Trip Unit: Non-Interchangeable
-
A.I.C. Rating: 14kA @ 480VAC; 18kA @ 240VAC
-
Temperature Rating: 40°C
-
Load Terminals: Included
-
Dimensions:
- Width: 4.13 inches
- Length: 6.00 inches
- Depth: 3.38 inches
-
Approximate Shipping Weight: 5.50 lbs.
Material Compliance and Certifications
- The EHC3100 is manufactured to meet its published electrical ratings and dimensional specifications for compatible Type EHC applications.
- Before installation, verify that the breaker type, amperage, pole configuration, voltage rating, interrupting capacity, and physical dimensions match the requirements of your existing equipment.
- Installation should always be completed by qualified personnel in accordance with applicable electrical codes and the manufacturer's recommendations.
Where It Works Best
The EHC3100 is commonly used in compatible Type EHC panelboards and electrical distribution systems found in commercial buildings, manufacturing facilities, warehouses, healthcare facilities, schools, office buildings, and other industrial or institutional environments.
If you're replacing an existing 100 amp, 3-pole Type EHC circuit breaker, matching the original specifications is the best way to maintain the integrity of your electrical system. The EHC3100 is designed to provide the correct form, fit, and function for compatible legacy equipment, helping keep your electrical distribution system operating as intended without unnecessary modifications.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:4.13
- Height:6.0
- Depth:3.38
- Poles:3
- Amperes:100
- A.I.C. Rating & Volts:14k @ 480VAC; 18k @ 240VAC
- Type:EHC
- Approx Dimensions:4.13"W x 6.00"H x 3.38"D
- Additional Notes:Thermal-magnetic circuit breaker with non-interchangeable trip unit. 40°C rated. This item includes load terminals.
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).