EHD1030 - 30Amp Circuit Breaker
- 30 Amp
- 14k @ 277VAC
- 1 Pole
Purchase Options: New In Box
EHD1030 - 30Amp Circuit Breaker Description
EHD1030 - 30Amp Circuit Breaker
When you need a 30 Amp replacement circuit breaker for compatible Eaton EHD Series equipment, the Eaton EHD1030 delivers the form, fit, and function your existing electrical system was designed for. Whether you're performing scheduled maintenance, replacing a failed breaker, or keeping spare inventory on hand, matching the original specifications is one of the most important steps in maintaining safe and dependable operation.
The EHD1030 is a single-pole thermal-magnetic molded case circuit breaker featuring a non-interchangeable trip unit that helps protect electrical circuits from overloads and short circuits. Rated for 14kA interrupting capacity at 277 VAC and designed for 40°C ambient operation, this breaker is built to last in demanding commercial and industrial environments. It also comes with load terminals included, helping streamline installation in compatible equipment.
Key Features and Benefits
- Genuine Eaton EHD Series molded case circuit breaker
- 30 Amp current rating
- Single-pole configuration
- Thermal-magnetic trip mechanism helps protect against overloads and short circuits
- Non-interchangeable trip unit
- Rated for operation in ambient temperatures up to 40°C
- Includes load terminals for compatible installations
- Compact design for applications requiring an EHD Series breaker
- Built to last for long-term service
- Designed as a form, fit, and functional replacement for compatible Eaton electrical equipment
Technical Specifications
-
Manufacturer: Eaton
-
Part Number: EHD1030
-
Series / Type: EHD Thermal-Magnetic Molded Case Circuit Breaker
-
Amperage: 30 Amps
-
Poles: 1
-
Voltage Rating: 277 VAC
-
Interrupting Capacity: 14kA @ 277 VAC
-
Trip Unit: Thermal-Magnetic, Non-Interchangeable
-
Temperature Rating: 40°C Ambient
-
Terminals: Load Terminals Included
-
Dimensions:
- Width: 1.38 in.
- Length: 6.00 in.
- Depth: 3.38 in.
-
Approximate Shipping Weight: 3.00 lbs.
Material Compliance and Certifications
The Eaton EHD1030 is manufactured to Eaton's quality standards for molded case circuit breakers and is intended for use in compatible electrical distribution equipment. Installation should always follow applicable electrical codes and the manufacturer's recommendations. Before replacing an existing breaker, verify compatibility with your panelboard, switchboard, or other electrical equipment to ensure proper fit and operation.
Where It Works Best
The Eaton EHD1030 is commonly used in commercial, industrial, and institutional electrical systems where a 30 Amp, single-pole EHD Series circuit breaker is specified. It is well-suited for branch-circuit protection serving lighting systems, HVAC equipment, motor-control applications, machinery, and electrical distribution panels in existing installations. Whether you're restoring equipment after a breaker failure or performing preventive maintenance, the EHD1030 provides a dependable form, fit, and functional replacement for compatible legacy electrical systems.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:1.38
- Height:6.0
- Depth:3.38
- Poles:1
- Amperes:30
- A.I.C. Rating & Volts:14k @ 277VAC
- Type:EHD
- Approx Dimensions:1.38"W x 6.00"H x 3.38"D
- Additional Notes:Thermal-magnetic circuit breaker with non-interchangeable trip unit. 40°C rated. This item includes load terminals.
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).