EHD2090L - 90A Circuit Breaker
- 90 Amp
- 14k @ 480VAC; 18k @ 240VAC
- 2 Pole
Purchase Options:
EHD2090L - 90A Circuit Breaker Description
EHD2090L - 90A Circuit Breaker
When dependable circuit protection is essential, the Eaton EHD2090L Series C molded case circuit breaker delivers the ratings and compatibility needed for a wide range of commercial and industrial electrical systems. Designed as a complete 2-pole, 90-amp molded case circuit breaker, it features Eaton's proven F-frame construction and a T186 thermal-magnetic trip unit to help protect electrical equipment from overloads and short circuits. Whether you're maintaining existing switchgear, servicing a panelboard, or replacing a compatible breaker in a legacy installation, the EHD2090L is built for the proper form, fit, and function your system requires.
Key Features and Benefits
- Provides 90 Amp overcurrent protection for compatible commercial and industrial electrical systems.
- Two-pole configuration designed for applications requiring protection across two conductors.
- Genuine Eaton Series C F-frame, complete molded-case circuit breaker.
- T186 thermal-magnetic trip unit helps protect against overloads and short circuits.
- Line and load terminals are supported for installation in equipment designed for this breaker configuration.
- Rated for 50/60 Hz AC electrical systems.
- UL Listed for compliance with applicable safety standards.
- Built to last for long-term service in properly maintained electrical systems.
- Designed as a form-, fit-, and function-replacement for compatible Eaton Series C equipment.
Technical Specifications
-
Manufacturer: Eaton
-
Series: Series C
-
Catalog Number: EHD2090L
-
UPC: 786679850923
-
Product Type: Complete Molded Case Circuit Breaker
-
Circuit Breaker Type: EHD
-
Frame Type: F Frame
-
Amperage Rating: 90A
-
Number of Poles: 2
-
Trip Type: T186 Thermal-Magnetic
-
Frequency Rating: 50/60 Hz
-
Interrupt Rating:
- 18 kAIC at 240 Vac
- 14 kAIC at 480 Vac
-
Terminals: Line and Load
-
Dimensions:
- Width: 2.75 in.
- Length: 6.00 in.
- Depth: 3.38 in.
-
Weight: 3 lb
-
Certification: UL Listed
Material Compliance and Certifications
The Eaton EHD2090L is UL Listed and manufactured to Eaton's specifications for the Series C family of molded case circuit breakers. It is intended for installation in compatible electrical distribution equipment designed to accept an EHD F-frame complete breaker. To help ensure proper fit and operation, confirm that the catalog number, frame type, amperage, pole configuration, interrupting capacity, trip unit, and terminal configuration match the original equipment before installation.
Where It Works Best
The EHD2090L is well suited for maintaining compatible electrical distribution systems in commercial buildings, industrial facilities, manufacturing plants, institutional campuses, and other demanding environments. It is commonly installed in compatible panelboards, switchboards, motor control centers, HVAC equipment, and branch circuit applications that require a 90 Amp, 2-pole Eaton Series C F-frame molded case circuit breaker with line and load terminals.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:2.75
- Height:6.0
- Depth:3.38
- Poles:2
- Amperes:90
- A.I.C. Rating & Volts:14k @ 480VAC; 18k @ 240VAC
- Type:EHD
- Approx Dimensions:2.75"W x 6.00"H x 3.38"D
- Additional Notes:Thermal-magnetic circuit breaker with non-interchangeable trip unit. 40°C rated. This item includes line and load terminals.
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).