HFD62B110L - 110Amp Circuit Breaker
- 110 Amp
- 25k @ 600VAC; 65k @ 480VAC; 100k @ 240VAC
- 2 Pole
Purchase Options:
HFD62B110L - 110Amp Circuit Breaker Description
HFD62B110L - 110Amp Circuit Breaker
When an existing electrical system calls for a Siemens HFD62B110L, getting the specifications right matters. This 110-amp, 2-pole molded case circuit breaker is part of the Siemens FD-frame family and uses a thermal-magnetic trip unit for overload and short-circuit protection. Rather than treating breakers with similar amperage as interchangeable, check the complete set of ratings and installation requirements against the equipment you're servicing. With the right application and proper installation, this is a straightforward, built-to-last solution for maintaining the intended form, fit, and function of compatible electrical equipment.
Key Features and Benefits
- 110-amp rating for equipment designed around this specific current requirement.
- 2-pole configuration for compatible two-pole applications.
- FD frame for installations requiring this Siemens frame type and physical configuration.
- Rated for up to 600VAC.
- Thermal-magnetic trip provides overload and short-circuit protection according to the breaker's specified characteristics.
- Standard 40°C configuration.
- Meets UL 489 and IEC 60947-2 standards.
Technical Specifications
-
Manufacturer: Siemens
-
Catalog Number: HFD62B110L
-
Product Type: Molded Case Circuit Breaker
-
Product Family: HFD6
-
Frame: FD
-
Current Rating: 110A
-
Number of Poles: 2
-
Maximum Voltage: 600VAC
-
Trip Type: Thermal-Magnetic
-
Interrupting Rating at 600V: 25 kAIC
-
Interrupting Rating at 480V: 65 kAIC
-
Temperature Configuration: Standard 40°C
-
Approximate Dimensions: 4.5" W × 9.5" H × 4" D
-
Standards: UL 489 / IEC 60947-2
Material Compliance and Certifications
The HFD62B110L molded case circuit breaker is specified to meet UL 489 and IEC 60947-2, two recognized standards applicable to low-voltage circuit breakers.
Where It Works Best
The Siemens HFD62B110L fits best in commercial and industrial electrical applications that specifically call for a 110A, 2-pole FD-frame molded case circuit breaker with the corresponding voltage and interrupting ratings. It can also make sense for maintenance of existing and legacy electrical equipment where keeping the original breaker configuration is important.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Siemens®, I-T-E®, and Murray® are registered trademarks of Siemens AG. Products sold are surplus, used, or refurbished and are NOT supplied by Siemens AG or its affiliates.
Specifications
- Width:4.5
- Height:9.5
- Depth:4.0
- Poles:2
- Amperes:110
- A.I.C. Rating & Volts:25k @ 600VAC; 65k @ 480VAC; 100k @ 240VAC
- Type:HFD6
- Approx Dimensions:4.50"W x 9.50"H x 4.00"D
- Additional Notes:50/60Hz, 40°C, HACR Rated, Sentron Frame Molded Case Circuit Breaker with Interchangeable Trip Unit, Includes Line and Load-Side Terminals - discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).