HFXD62B090 - 90Amp Circuit Breaker

HFXD62B090 - 90Amp Circuit Breaker

When you’re matching a replacement breaker to existing electrical equipment, the small details matter just as much as the amp rating. The HFXD62B090 is a 90-amp, 2-pole HFXD6 Sentron Frame molded case circuit breaker designed for compatible systems that require this specific electrical and mechanical configuration. That’s especially helpful with older or legacy electrical systems, where breakers can look similar while differing in frame, poles, interrupting capacity, terminal setup, or mounting requirements.

Key Features and Benefits

• 90A, 2-pole configuration: Designed for compatible applications that require a 90-amp, two-pole molded case circuit breaker.
• HFXD6 type: Gives maintenance professionals a clear reference when matching the breaker to existing equipment.
• Sentron Frame design: Intended for equipment built around this specific molded case breaker configuration.
• Non-interchangeable trip unit: Provides the fixed trip-unit arrangement specified for this breaker.
• HACR rated: Suitable for applications where an HACR-rated circuit breaker is required.
• Suitable for reverse feeding: Can be used in compatible reverse-fed installations when permitted by the equipment.
• Load-side terminals included: Supplied with the specified load-side terminal arrangement.

Technical Specifications

• Part Number: HFXD62B090
  
• Type: HFXD6
  
• Product Type: Sentron Frame Molded Case Circuit Breaker
  
• Amperage: 90A
  
• Poles: 2
  
• A.I.C. Rating at 600VAC: 25kA
  
• A.I.C. Rating at 480VAC: 65kA
  
• A.I.C. Rating at 240VAC: 100kA
  
• Frequency: 50/60Hz
  
• Temperature Rating: 40°C
  
• Trip Unit: Non-Interchangeable
  
• HACR Rated: Yes
  
• Reverse-Fed Applications: Suitable
  
• Terminals: Load-side terminals included
  
• Height: 9.50 in.
  
• Width: 4.50 in.
  
• Depth: 4.00 in.
  
• Overall Dimensions:
  • 4.50"W x 9.50"H x 4.00"D
• Approximate Shipping Weight: 14.00 lbs.
  

Material Compliance and Certifications

The available specifications identify the HFXD62B090 as HACR rated and list operation at 50/60Hz with a 40°C rating. No additional material-compliance declarations or certification details are included in the supplied information, so additional approvals should not be assumed without checking the breaker labeling or applicable equipment documentation.

Where It Works Best

The HFXD62B090 90A 2-pole circuit breaker is best suited to compatible commercial and industrial electrical distribution equipment that specifically calls for an HFXD6 Sentron Frame molded case breaker with these ratings and physical characteristics.