HFXD62B175L - 175Amp Circuit Breaker

HFXD62B175L - 175Amp Circuit Breaker

If you're replacing a breaker in existing electrical equipment, the right match comes down to the full specification—not just the amp rating. The HFXD62B175L is a 175-amp, 2-pole HFXD6 Sentron frame molded case circuit breaker intended for compatible electrical distribution systems that require this exact configuration. For compatible legacy and existing equipment, the HFXD62B175L is a practical form, fit, and functional replacement when the frame, poles, interrupting ratings, trip configuration, terminals, and dimensions all line up. Properly selected, installed, and maintained, it is built to last in its intended application.

Key Features and Benefits

• 175A, 2-Pole Configuration: Designed for compatible systems requiring a 175-amp, two-pole molded case circuit breaker.
• Non-Interchangeable Trip Unit: Uses the specified fixed trip-unit configuration for this breaker model.
• Line and Load-Side Terminals Included: Both terminal sets are included, which is an important detail when checking compatibility with existing equipment.
• Reverse-Feed Suitable: Can be used in compatible reverse-fed applications where permitted by the equipment and installation requirements.
• HACR Rated: Identified for applications that require an HACR-rated breaker.
• 50/60Hz Operation: Suitable for compatible systems operating at either listed frequency.
  

Technical Specifications

• Part Number: HFXD62B175L
  
• Type / Frame: HFXD6
  
• Breaker Type: Sentron Frame Molded Case Circuit Breaker
  
• Amperage: 175A
  
• Poles: 2
  
• A.I.C. Rating at 600VAC: 25kA
  
• A.I.C. Rating at 480VAC: 65kA
  
• A.I.C. Rating at 240VAC: 100kA
  
• Frequency: 50/60Hz
  
• Temperature Rating: 40°C
  
• Trip Unit: Non-Interchangeable
  
• HACR Rated: Yes
  
• Reverse Feed: Suitable for Reverse-Fed Applications
  
• Terminals: Line and Load-Side Terminals Included
  
• Width: 4.50 in.
  
• Height: 9.50 in.
  
• Depth: 4.00 in.
  
• Overall Dimensions:
  • 4.50"W x 9.50"H x 4.00"D
• Approx. Shipping Weight: 14.00 lbs.
  

Material Compliance and Certifications

The available product information identifies the HFXD62B175L as HACR rated, with 50/60Hz operation and a 40°C temperature rating.

No additional material-compliance declarations or agency certifications were included in the supplied specifications, so no extra compliance claims should be assumed.

Where It Works Best

The HFXD62B175L 175A 2-pole molded case circuit breaker is best suited to compatible commercial and industrial electrical distribution equipment that specifically calls for an HFXD6 frame breaker with the listed electrical and physical characteristics. It can be especially useful in existing and legacy electrical systems, where keeping the required form, fit, and function is the main objective.