HFXD63B200L - 200Amp Circuit Breaker

HFXD63B200L - 200Amp Circuit Breaker

When you’re matching a circuit breaker to existing equipment, the details matter—and the HFXD63B200L gives maintenance teams and electrical professionals a clearly defined set of specifications to work from. This 200-amp, 3-pole HFXD6 Sentron frame molded case circuit breaker features a non-interchangeable trip unit and is designed for compatible commercial and industrial electrical distribution applications.

Key Features and Benefits

• 200-Amp Rating: Designed for compatible applications requiring a 200A molded case circuit breaker.
• 3-Pole Configuration: Provides the three-pole arrangement required by matching electrical distribution equipment.
• Line and Load-Side Terminals Included: Both terminal sets are included with this configuration, an important distinction when matching the HFXD63B200L to an existing installation.
• Non-Interchangeable Trip Unit: Uses the specified non-interchangeable trip arrangement associated with this model.
• Suitable for Reverse Feed: Supports reverse-fed configurations where the equipment and application permit this arrangement.
• HACR Rated: Suitable for applications specifically requiring an HACR-rated circuit breaker, subject to all applicable equipment requirements.
• 50/60Hz Compatibility: Designed for systems operating at either of the stated frequencies.
  

Technical Specifications

• Part Number: HFXD63B200L
  
• Type / Frame: HFXD6
  
• Breaker Type: Sentron Frame Molded Case Circuit Breaker
  
• Amperage: 200A
  
• Poles: 3
  
• A.I.C. Rating @ 600VAC: 25kA
  
• A.I.C. Rating @ 480VAC: 65kA
  
• A.I.C. Rating @ 240VAC: 100kA
  
• Frequency: 50/60Hz
  
• Temperature Rating: 40°C
  
• Trip Unit: Non-Interchangeable
  
• HACR Rated: Yes
  
• Reverse Feed: Suitable for Reverse-Fed Applications
  
• Terminals: Line and Load-Side Terminals Included
  
• Width: 4.50 in.
  
• Height: 9.50 in.
  
• Depth: 4.00 in.
  
• Dimensions:
  • 4.50"W x 9.50"H x 4.00"D
• Approx. Shipping Weight: 14.00 lbs.
  

Material Compliance and Certifications

Based on the supplied specifications, the HFXD63B200L is HACR rated and specified for 50/60Hz operation at a 40°C rating.
No additional material-compliance declarations or agency certifications were provided in the available specifications.

Where It Works Best

The HFXD63B200L 200A 3-pole circuit breaker is best suited for compatible commercial and industrial electrical distribution systems, particularly existing or legacy equipment designed around the HFXD6 Sentron frame. It is also relevant where the application requires a three-pole 200A breaker with both line- and load-side terminals, or where an approved reverse-fed configuration is required.