HMCP400F5 - 400Amp Motor Circuit Protector
- 400 Amp
- 600VAC
- 3 Pole
Purchase Options: New In Box
HMCP400F5 - 400Amp Motor Circuit Protector Description
HMCP400F5 - 400Amp Motor Circuit Protector
When you're replacing a motor circuit protector, getting the details right matters. The Eaton HMCP400F5 is a 400A, three-pole motor circuit protector in the Series C, Frame K family. It has a 625–1250A magnetic trip range and is rated for a maximum of 600V AC or 250V DC. For maintenance teams working with existing equipment, those specifications make it easier to determine whether the HMCP400F5 matches the unit already in service.
Key Features and Benefits
- 400A rating for applications requiring this specific amperage.
- Three-pole design for compatible motor protection applications.
- 625–1250A magnetic trip range provides a clearly defined specification for replacement matching.
- Frame K configuration helps identify the proper physical fit for compatible equipment.
- Part of the Series C product family.
- Rated for up to 600V AC and 250V DC.
- Line and load terminals match the specified HMCP400F5 configuration.
Technical Specifications
-
Manufacturer: Eaton
-
Catalog Number: HMCP400F5
-
UPC: 786679342329
-
Type: Motor circuit protector
-
Product Type: Molded case circuit breaker accessory
-
Series: Series C
-
Frame Size: Frame K
-
Amperage Rating: 400 A
-
Magnetic Trip Range: 625–1250 A
-
Maximum Voltage: 600 V AC / 250 V DC
-
Number of Poles: Three-pole
-
Terminals: Line and load
-
Height: 10.13 in
-
Width: 5.5 in
-
Length/Depth: 4.1 in
-
Weight: 11.5 lb
Material Compliance and Certifications
The HMCP400F5 is UL Listed and CSA Certified, giving buyers clear certification information when matching a replacement component to existing equipment requirements.
Compatibility should always be checked against the application before installation. In particular, confirm the 400A rating, Frame K size, three-pole configuration, 625–1250A magnetic trip range, voltage ratings, terminals, and physical dimensions against the equipment documentation and the unit being replaced.
Where It Works Best
The Eaton HMCP400F5 makes the most sense in motor control applications specifically designed around its 400A Series C, Frame K configuration. It's especially useful when maintaining existing or legacy equipment and the job calls for matching the original component's electrical ratings and physical characteristics rather than changing the system configuration.
For replacement work, don't stop at the 400A rating. Check the complete set of specifications—including frame size, number of poles, magnetic trip range, maximum voltage, terminals, and dimensions. When those details line up with the existing application, the HMCP400F5 provides the form, fit, and function needed to keep the equipment configured as intended.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:5.5
- Height:10.13
- Depth:4.1
- Poles:3
- Amperes:400
- A.I.C. Rating & Volts:600VAC
- Type:HMCP
- Sub-Category:MOTOR CIRCUIT PROTECTOR
- Approx Dimensions:5.50"W x 10.13"H x 4.10"D
- Additional Notes:Cam Settings: (A) 48.1 - 53.8; (B) 53.9 - 59.9; (C) 60.0 - 66.1; (D) 66.2 - 72.3; (E) 72.4 - 78.4; (F) 78.5 - 83.8; (G) 83.9 - 89.9; (H) 90.0 - 96.1; (I) 96.2 - 102.0 . K Frame Body. Includes Line and Load-Side Terminal - discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).