HMCP400J5C - 400Amp Motor Circuit Protector
- 400 Amp
- 600VAC
- 3 Pole
Purchase Options: New In Box
HMCP400J5C - 400Amp Motor Circuit Protector Description
HMCP400J5C - 400Amp Motor Circuit Protector
When you need an Eaton HMCP400J5C for an existing application, getting the details right matters. This 400A, three-pole Series C motor circuit protector is designed for Frame J-K applications and has an 875–1750A magnetic trip range. It is rated for a maximum of 600V AC or 250V DC and comes with line and load terminals made of non-aluminum material. For maintenance and replacement work, those specifications make it easier to compare the HMCP400J5C with the device already installed and to confirm that the electrical and physical requirements align.
Key Features and Benefits
- 400A rating: Designed for applications requiring a 400-amp motor circuit protector.
- Three-pole construction: Matches equipment requiring a three-pole configuration.
- 875–1750A magnetic trip range: An important specification when confirming the correct device for an existing system.
- Frame J-K: Built for applications designed around this frame size.
- Series C: Part of Eaton's Series C product family.
- Voltage ratings: up to 600V AC and 250V DC.
- Line and load terminals: Uses non-aluminum terminal material.
Technical Specifications
-
Manufacturer: Eaton
-
Catalog Number: HMCP400J5C
-
UPC: 786679342527
-
Type: Motor circuit protector
-
Product Type: Molded case circuit breaker accessory
-
Series: Series C
-
Amperage Rating: 400 A
-
Frame Size: Frame J-K
-
Number of Poles: Three-pole
-
Magnetic Trip Range: 875–1750 A
-
Maximum Voltage: 600 V AC / 250 V DC
-
Terminals: Line and load
-
Terminal Material: Non-aluminum
-
Height: 10.13 in
-
Width: 5.5 in
-
Length/Depth: 4.1 in
-
Weight: 11.5 lb
Material Compliance and Certifications
The HMCP400J5C is UL Listed and CSA Certified. These certifications can be important when replacing electrical components in equipment where the original specifications and certification requirements need to be maintained.
Eaton lists additional compliance information as “Contact Manufacturer.” Installation requirements should always be checked against the equipment documentation and applicable electrical standards.
Where It Works Best
The HMCP400J5C makes the most sense in existing motor protection equipment that calls for a 400A, three-pole, Frame J-K Series C motor circuit protector with an 875–1750A magnetic trip range. It is especially useful in maintenance and replacement situations where matching the original component's electrical ratings, physical dimensions, and configuration is the priority.
Before using the HMCP400J5C as a replacement, compare more than the amperage rating. Check the catalog number, frame size, number of poles, magnetic trip range, voltage rating, terminal configuration, and dimensions against the existing device and equipment documentation. That simple check can go a long way toward confirming the right form, fit, and function for the application.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:5.5
- Height:10.13
- Depth:4.1
- Poles:3
- Amperes:400
- A.I.C. Rating & Volts:600VAC
- Type:HMCP
- Sub-Category:MOTOR CIRCUIT PROTECTOR
- Approx Dimensions:5.50"W x 10.13"H x 4.10"D
- Additional Notes:Cam Settings: (A) 67.4 - 75.3; (B) 75.4 - 83.8; (C) 83.9 - 92.3; (D) 92.4 - 100.7; (E) 100.8 - 109.2; (F) 109.3 - 117.6; (G) 117.7 - 126.1; (H) 126.2 - 134.6; (I) 134.7 - 142.8 . K Frame Body. Includes Line and Load-Side Terminal - discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).