HMCP400L5 - 400Amp Motor Circuit Protector
- 400 Amp
- 600VAC
- 3 Pole
Purchase Options: New In Box
HMCP400L5 - 400Amp Motor Circuit Protector Description
HMCP400L5 - 400Amp Motor Circuit Protector
When you're replacing a motor circuit protector, getting the catalog number and electrical specifications right matters. The Eaton HMCP400L5 is a 400A, three-pole Series C motor circuit protector made for applications requiring a Frame J-K device. It has a 1125–2250A magnetic trip range and is rated for a maximum of 600V AC or 250V DC. The HMCP400L5 also uses line and load terminals and measures 10.13 inches high, 5.5 inches wide, and 4.1 inches deep. These details make it easier to compare the unit with an existing motor circuit protector when maintaining compatible equipment or legacy electrical systems.
Key Features and Benefits
- 400A rating for compatible motor protection applications.
- Three-pole design for equipment requiring this configuration.
- 1125–2250A magnetic trip range, an important detail when matching the HMCP400L5 to an existing application.
- Frame J-K construction for compatible equipment and installations.
- Part of the Eaton Series C product family.
- Rated for a maximum of 600V AC and 250V DC.
- Line and load terminals match the connection arrangement specified for this model.
- Published dimensions help take some of the guesswork out of checking physical fit.
Technical Specifications
-
Manufacturer: Eaton
-
Catalog Number: HMCP400L5
-
UPC: 786679342404
-
Product Type: Molded case circuit breaker accessory
-
Type: Motor circuit protector
-
Series: Series C
-
Amperage Rating: 400 A
-
Frame Size: Frame J-K
-
Number of Poles: Three-pole
-
Magnetic Trip Range: 1125–2250 A
-
Maximum Voltage: 600 V AC / 250 V DC
-
Terminals: Line and load
-
Product Height: 10.13 in
-
Product Width: 5.5 in
-
Product Length/Depth: 4.1 in
-
Product Weight: 11.5 lb
Material Compliance and Certifications
The Eaton HMCP400L5 is UL Listed and CSA Certified. Additional compliance information should be confirmed with the manufacturer when an installation has specific code, facility, or equipment requirements.
For replacement work, certifications are only part of the compatibility check. Always confirm that the electrical ratings and physical configuration are appropriate for the equipment in which the motor circuit protector will be installed.
Where It Works Best
The HMCP400L5 makes the most sense in motor protection applications specifically calling for a 400A, three-pole, Frame J-K Series C motor circuit protector with a 1125–2250A magnetic trip range. It's particularly relevant when maintaining existing or legacy equipment where preserving the required form, fit, and electrical function is the goal.
Replacing an existing unit? Check more than the amperage stamped on the device. Compare the HMCP400L5 catalog number, frame size, three-pole configuration, magnetic trip range, voltage rating, terminal arrangement, and physical dimensions against the equipment requirements. That straightforward check can help determine whether this is the correct match for the application.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:5.5
- Height:10.13
- Depth:4.1
- Poles:3
- Amperes:400
- A.I.C. Rating & Volts:600VAC
- Type:HMCP
- Sub-Category:MOTOR CIRCUIT PROTECTOR
- Approx Dimensions:5.50"W x 10.13"H x 4.10"D
- Additional Notes:Cam Settings: (A) 86.6 - 97.3; (B) 97.4 - 108.4; (C) 108.5 - 118.8; (D) 118.9 - 129.9; (E) 130.0 - 140.7; (F) 140.8 - 151.5; (G) 151.6 - 162.3; (H) 162.4 - 173.0; (I) 173.1 - 183.6 . K Frame Body. Includes Line and Load-Side Terminal - discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).