JB3090 - 90A Circuit Breaker
- 90 Amp
- 14k @ 600VAC; 22k @ 480VAC; 25k @ 240VAC
- 3 Pole
Purchase Options: New Surplus
JB3090 - 90A Circuit Breaker Description
JB3090 - 90A Circuit Breaker
When you're replacing a breaker in older electrical equipment, amperage is only part of the picture. The physical size, pole count, trip unit, terminal arrangement, and interrupting ratings all need to line up. The JB3090 is a 90-amp, 3-pole Type JB circuit breaker with thermal-magnetic operation and a non-interchangeable trip unit. For compatible legacy equipment that requires these specifications, the JB3090 provides a clearly defined form, fit, and function replacement option. These products are built to last, but proper selection still depends on confirming all relevant ratings and physical requirements before installation.
Key Features and Benefits
- 90A rating: Provides the specified 90-amp configuration for compatible equipment.
- 3-pole design: Matches installations requiring three poles rather than relying on amperage alone to identify the correct breaker.
- Type JB: An important compatibility detail when replacing a breaker in existing or legacy electrical equipment.
- Thermal-magnetic operation: Uses the specified thermal-magnetic trip design.
- Non-interchangeable trip unit: Keeps the trip configuration clearly defined when comparing the JB3090 with the existing breaker.
- Load-side terminals included: The supplied terminal arrangement is known in advance, helping with replacement planning.
Technical Specifications
-
Part Number: JB3090
-
Type: JB
-
Amperage: 90 A
-
Number of Poles: 3
-
A.I.C. Rating at 600VAC: 14k
-
A.I.C. Rating at 480VAC: 22k
-
A.I.C. Rating at 240VAC: 25k
-
Interrupting Capacity at 600VAC: 14,000 A
-
Interrupting Capacity at 480VAC: 22,000 A
-
Interrupting Capacity at 240VAC: 25,000 A
-
Operation: Thermal Magnetic
-
Trip Unit: Non-Interchangeable
-
Temperature Rating: 40°C
-
Load-Side Terminals: Included
-
Width: 4.13 in.
-
Height / Length: 10.00 in.
-
Depth: 4.13 in.
-
Overall Dimensions: 4.13"W x 10.00"L x 4.13"D
-
Approximate Ship Weight: 14.00 lb.
Material Compliance and Certifications
No specific UL, CSA, IEC, RoHS, REACH, or other material compliance or certification information was provided for the JB3090. These certifications should therefore not be assumed from its Type JB designation or electrical ratings.
Where It Works Best
The JB3090 90A 3-pole circuit breaker is intended for compatible existing and legacy equipment where the required replacement calls for a Type JB breaker with the same electrical and physical characteristics. Its 90A rating is important, but so are the three-pole arrangement, thermal-magnetic operation, non-interchangeable trip unit, load-side terminals, and physical dimensions.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:4.13
- Height:10.0
- Depth:4.13
- Poles:3
- Amperes:90
- A.I.C. Rating & Volts:14k @ 600VAC; 22k @ 480VAC; 25k @ 240VAC
- Type:JB
- Approx Dimensions:4.13"W x 10.00"L x 4.13"D
- Additional Notes:40°C Rated, Thermal Magnetic Circuit Breaker With Non-Interchangeable Trip Unit. This item includes load-side terminals. - discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).