JD63T350 - 350Amp Trip Unit Description
JD63T350 - 350Amp Trip Unit
The Siemens JD63T350 is worth a careful review if the equipment calls for a 350-amp JD-frame component. Siemens describes this catalog number as "TU ONLY" (trip unit only), so that detail should be confirmed before treating it as a replacement part. The JD63T350 is built to last, while the deciding factor for replacement work remains simple: its specifications must match the requirements of your existing equipment.
Key Features and Benefits
- 350A, three-pole configuration: Gives you two of the first specifications to verify against the existing unit.
- Trip unit only: Siemens specifically labels the JD63T350 TU ONLY to help distinguish the component configuration when sourcing replacements.
- JD frame: Intended for equipment requiring the stated JD-frame arrangement.
- Thermal-magnetic trip unit: Uses the trip technology identified in the manufacturer specifications.
- TA2J6500 lugs included: Siemens specifies these lugs on both the line and load sides.
- Copper or aluminum conductors: Accommodates the manufacturer-specified wire ranges for either conductor material.
Technical Specifications
-
Manufacturer: Siemens
-
Catalog Number / MFN: JD63T350
-
Article Number: US2:JD63T350
-
Product Line: SENTRON
-
Product Family: JD6, 25 kAIC, 600VAC
-
Component: Trip Unit Only (TU ONLY)
-
Frame: JD
-
Amperage Rating: 350A
-
Poles: 3
-
Voltage: 600V
-
Trip Type: Thermal-magnetic
-
Interrupting Rating at 600V: 25 kAIC
-
Interrupting Rating at 480V: 35 kAIC
-
Line-Side Lugs: TA2J6500
-
Load-Side Lugs: TA2J6500
-
Copper Wire Range: 3/0 AWG–500 kcmil
-
Aluminum Wire Range: 4/0 AWG–500 kcmil
-
Dimensions (W x H x D): 7.5 x 11 x 4 in.
-
Net Weight: 2.48 lb
-
UPC: 783643213487
-
Commodity Code: 85363099
-
Country of Origin: Mexico
-
Standards: UL 489 / IEC 60947-2
Material Compliance and Certifications
Siemens states that the JD63T350 meets UL 489 and IEC 60947-2 standards. The manufacturer information provided for this catalog number does not separately identify it as UL Listed, so that claim should not be added based only on the standards statement.
Where It Works Best
The JD63T350 belongs in the conversation when existing or legacy equipment specifically calls for a 350A, three-pole JD-frame thermal-magnetic trip unit with these electrical and physical characteristics. The TU ONLY designation matters here; it should be checked alongside the frame and ratings, rather than assuming the catalog number represents a complete breaker.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Siemens®, I-T-E®, and Murray® are registered trademarks of Siemens AG. Products sold are surplus, used, or refurbished and are NOT supplied by Siemens AG or its affiliates.
Specifications
- Width:4.0
- Height:7.5
- Depth:4.0
- Poles:3
- Amperes:350
- A.I.C. Rating & Volts:600VAC
- Type:JD6
- Sub-Category:TRIP UNIT
- Approx Dimensions:7.50"L x 4.00"W x 4.00"D
- Additional Notes:Only For JD6-A, HJD6-A, HHJD6, LD6-A, HLD6-A, And HHLD6 Frames - discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).

