JDB3175 - 175Amp Circuit Breaker
- 175 Amp
- 18k @ 600VAC; 35k @ 480VAC; 65k @ 240VAC
- 3 Pole
Purchase Options: New In Box
JDB3175 - 175Amp Circuit Breaker Description
JDB3175 - 175Amp Circuit Breaker
The JDB3175 gives you several concrete details to work from when matching a circuit breaker to equipment already in service. It is a 175A, three-pole Eaton Series C molded case circuit breaker with a JDB breaker type, J frame, and T186 trip type. Eaton identifies it as a complete breaker, with aluminum line and load terminals included. The JDB3175 is built to last, but the replacement selection still comes down to the basics: make sure the frame, breaker type, trip type, terminals, electrical ratings, and dimensions match the requirements of the existing equipment.
Key Features and Benefits
- The 175A three-pole design provides a clear starting point for confirming electrical compatibility.
- JDB circuit breaker type helps identify the specific breaker configuration required by existing equipment.
- J frame and T186 trip type provide additional identifiers for a form, fit, and functional replacement check.
- Supplied as a complete Series C molded case circuit breaker.
- Aluminum line and load terminals are included, an important detail when comparing connection requirements.
- Rated for 600VAC and 250VDC at 50–60 Hz.
- UL Listed according to the supplied manufacturer specifications.
Technical Specifications
-
Catalog Number: JDB3175
-
Manufacturer: Eaton
-
Product Name: Series C complete molded case circuit breaker
-
Product Type: Molded case circuit breaker
-
Series: Series C
-
Circuit Breaker Type: JDB
-
Circuit Breaker Frame Type: Complete breaker
-
Frame: J
-
Amperage Rating: 175A
-
Number of Poles: Three-pole
-
Voltage Rating: 600VAC, 250VDC
-
Frequency Rating: 50–60 Hz
-
Trip Type: T186
-
Interrupt Rating at 240VAC: 65 kAIC
-
Interrupt Rating at 480VAC: 35 kAIC
-
Terminals: Line and load
-
Terminal Material: Aluminum
-
Product Width: 4.13 in.
-
Product Height: 4.13 in.
-
Product Length / Depth: 4.06 in.
-
Product Weight: 11.25 lb
-
UPC: 786679516287
-
Certification: UL Listed
Material Compliance and Certifications
The JDB3175 is UL Listed, providing a manufacturer-confirmed certification that buyers can check when matching the breaker to the requirements of an existing installation. No additional material or environmental compliance information was supplied for this catalog number, so certifications such as RoHS, REACH, CSA, or IEC compliance should not be assumed.
Where It Works Best
The JDB3175 is suited to compatible existing and legacy electrical equipment that specifically calls for a 175A, three-pole Series C JDB circuit breaker with a J frame and T186 trip type. Because this model includes aluminum line and load terminals, the terminal arrangement and materials should also be part of the compatibility check.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:4.13
- Height:10.0
- Depth:4.06
- Poles:3
- Amperes:175
- A.I.C. Rating & Volts:18k @ 600VAC; 35k @ 480VAC; 65k @ 240VAC
- Type:JDB
- Approx Dimensions:4.13"W x 10.00"L x 4.06"D
- Additional Notes:40°C, J-Frame, HACR Rated, Molded Case, Thermal Magnetic Circuit Breaker with Non-Interchangeable Trip Unit. Includes Standard Line and Load-Side Lug Terminals - discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).