JDB3225W - 225Amp Circuit Breaker
- 225 Amp
- 18k @ 600VAC; 35k @ 480VAC; 65k @ 240VAC
- 3 Pole
Purchase Options: New In Box
JDB3225W - 225Amp Circuit Breaker Description
JDB3225W - 225Amp Circuit Breaker
At 240VAC, the JDB3225W carries a 65 kAIC interrupting rating; at 480VAC, that rating is 35 kAIC. Those voltage-specific numbers are useful checkpoints when you're identifying the correct breaker for equipment already in service. The JDB3225W is an Eaton Series C 225A, three-pole molded case circuit breaker with a JDB breaker type, J frame, and T186 trip type. The JDB3225W is built to last, and its clearly defined electrical and physical specifications make it practical to compare against the requirements of compatible existing and legacy equipment.
Key Features and Benefits
- 225A, three-pole design provides a clearly defined amperage and pole configuration for compatibility checks.
- JDB breaker type and J frame help identify the correct form and fit for existing equipment.
- Uses the specified T186 trip type.
- Supplied as a complete Series C molded case circuit breaker.
- Terminals are not included, allowing buyers to identify this specific terminal-free configuration when that is what the existing setup requires.
- Rated 600VAC and 250VDC at 50–60 Hz.
- UL Listed according to the supplied manufacturer specifications.
Technical Specifications
-
Catalog Number: JDB3225W
-
Manufacturer: Eaton
-
Product Name: Series C complete molded case circuit breaker
-
Product Type: Molded case circuit breaker
-
Series: Series C
-
Circuit Breaker Type: JDB
-
Frame: J
-
Circuit Breaker Frame Type: Complete breaker
-
Amperage Rating: 225A
-
Number of Poles: Three-pole
-
Voltage Rating: 600VAC, 250VDC
-
Frequency Rating: 50–60 Hz
-
Trip Type: T186
-
Interrupt Rating at 240VAC: 65 kAIC
-
Interrupt Rating at 480VAC: 35 kAIC
-
Terminals: Without terminals
-
Product Length / Depth: 4.06 in.
-
Product Height: 4.13 in.
-
Product Width: 4.13 in.
-
Product Weight: 11.25 lb
-
UPC: 786679516331
-
Certification: UL Listed
Material Compliance and Certifications
The JDB3225W is UL Listed according to the supplied manufacturer information. No additional material or environmental compliance information was provided for this catalog number, so no other certifications or compliance claims should be assumed.
Where It Works Best
The JDB3225W 225A circuit breaker is suited to compatible existing and legacy electrical equipment that requires its particular combination of three poles, JDB breaker type, J frame, T186 trip type, and Series C configuration. It is especially important to note that this catalog number is supplied without terminals. The required termination arrangement should therefore be confirmed separately rather than assumed from another JDB model.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:4.13
- Height:10.0
- Depth:4.06
- Poles:3
- Amperes:225
- A.I.C. Rating & Volts:18k @ 600VAC; 35k @ 480VAC; 65k @ 240VAC
- Type:JDB
- Approx Dimensions:4.13"W x 10.00"L x 4.06"D
- Additional Notes:40°C, J-Frame, HACR Rated, Molded Case, Thermal Magnetic Circuit Breaker with Non-Interchangeable Trip Unit. Does Not Include Any Lug Terminals - discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).