JDC3175 - 175Amp Circuit Breaker
- 175 Amp
- 35k @ 600VAC; 100k @ 480VAC; 200k @ 600VAC
- 3 Pole
Purchase Options: New In Box
JDC3175 - 175Amp Circuit Breaker Description
JDC3175 - 175Amp Circuit Breaker
When you’re replacing a circuit breaker in existing equipment, the amperage on the label is only one piece of the puzzle. The JDC3175 is built to last, while its clearly documented ratings and dimensions make it easier to check for the form, fit, and functional compatibility required by existing and legacy electrical equipment.
Key Features and Benefits
- 175A, three-pole breaker: A clearly defined configuration for equipment requiring this specific amperage and pole count.
- JDC breaker type: Helps narrow the compatibility check when replacing a breaker in an existing Series C installation.
- J frame: Provides another important identifier to compare with the breaker and equipment already in service.
- T186 trip type: Lets you verify the required trip configuration rather than choosing on amperage alone.
- Complete breaker: Supplied as a complete Series C molded case circuit breaker.
- Aluminum line and load terminals are included: the terminal arrangement is already specified, giving you one fewer unknown during the compatibility check.
- 600VAC / 250VDC rating: Clearly documented AC and DC voltage ratings for matching the breaker to the intended system.
Technical Specifications
-
Catalog Number: JDC3175
-
Manufacturer: Eaton
-
Product Name: Series C complete molded case circuit breaker
-
Product Type: Molded case circuit breaker
-
Series: Series C
-
Circuit Breaker Type: JDC
-
Frame: J
-
Circuit Breaker Frame Type: Complete breaker
-
Type: Complete breaker
-
Amperage Rating: 175A
-
Number of Poles: Three-pole
-
Voltage Rating: 600VAC, 250VDC
-
Frequency Rating: 50–60 Hz
-
Trip Type: T186
-
Interrupt Rating at 240VAC: 200 kAIC
-
Interrupt Rating at 480VAC: 100 kAIC
-
Terminals: Line and load
-
Terminal Material: Aluminum
-
Product Width: 4.13 in.
-
Product Height: 4.13 in.
-
Product Length / Depth: 4.06 in.
-
Product Weight: 14.25 lb
-
UPC: 782114211922
-
Certification: UL Listed
Material Compliance and Certifications
The JDC3175 is UL Listed, according to the supplied manufacturer specifications. That gives buyers and installers a documented certification to reference when confirming the requirements of the intended equipment or installation.
Where It Works Best
The JDC3175 is a practical choice when maintaining compatible existing or legacy electrical equipment that specifically requires a 175A, three-pole Series C JDC breaker with a J frame and T186 trip type. Because aluminum terminals are provided on both the line and load sides, the terminal arrangement should also be compared with the existing setup.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:4.13
- Height:10.0
- Depth:4.06
- Poles:3
- Amperes:175
- A.I.C. Rating & Volts:35k @ 600VAC; 100k @ 480VAC; 200k @ 600VAC
- Type:JDC
- Approx Dimensions:4.13"W x 10.00"H x 4.06"D
- Additional Notes:Thermal-magnetic circuit breaker with interchangeable trip unit. 40°C rated. HACR rated. This item includes load terminals. - discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).