KAL26225 - 225Amp Circuit Breaker

KAL26225 - 225Amp Circuit Breaker

The KAL26225 is easy to narrow down when you know which specifications to check. This 225-amp, two-pole Type KAL molded case circuit breaker uses thermal-magnetic protection and operates at 60 Hz. It is also 40°C rated. For connection compatibility, line and load lugs are included, an important detail when matching a replacement to existing or legacy electrical equipment. The KAL26225 is built to last; suitability for replacement ultimately depends on matching its electrical ratings, Type KAL designation, lug arrangement, and physical dimensions to the equipment already in place.

Key Features and Benefits

• 225A, two-pole configuration: Clearly defined electrical characteristics make it easier to confirm compatibility with the existing breaker.
• Type KAL molded case design: Provides an important identifier when sourcing a form, fit, and functional replacement.
• Thermal-magnetic protection: Uses the specified thermal-magnetic operating design.
• Line and load lugs included: Both sides are equipped with lugs, providing a clearly defined connection arrangement.
• 40°C rated: An additional operating specification to check against the breaker being replaced.
• 60 Hz operation: The frequency is clearly identified for compatibility checks.
  

Technical Specifications

• Part Number: KAL26225
  
• Product Type: Molded Case Circuit Breaker
  
• Type: KAL
  
• Amperage: 225A
  
• Number of Poles: 2
  
• Protection Type: Thermal-Magnetic
  
• Frequency: 60 Hz
  
• Temperature Rating: 40°C
  
• A.I.C. Rating at 240VAC: 42 kA
  
• A.I.C. Rating at 480VAC: 25 kA
  
• A.I.C. Rating at 600VAC: 22 kA
  
• Line-Side Connection: Lugs included
  
• Load-Side Connection: Lugs included
  
• Width: 4.50 in.
  
• Height: 8.00 in.
  
• Depth: 3.69 in.
  
• Overall Dimensions: 4.50" W × 8.00" H × 3.69"D
  
• Approximate Ship Weight: 5.75 lbs.
  

Material Compliance and Certifications

No specific UL, CSA, IEC, RoHS, REACH, or other certification or material-compliance information was included in the supplied specifications for the KAL26225. These certifications should not be assumed based on the product type or ratings. When a particular approval or compliance standard is required, verify it for the exact KAL26225 part number.

Where It Works Best

The KAL26225 circuit breaker is suited for compatible existing and legacy electrical equipment that requires a 225A, two-pole Type KAL thermal-magnetic molded-case circuit breaker with the stated interrupting ratings. Because line and load lugs are included, the connection arrangement is another useful checkpoint when comparing this breaker with the unit already installed.

For a form, fit, and functional replacement, compare the complete specification set before installation. That means confirming the 225A rating, two poles, Type KAL designation, thermal-magnetic protection, 60 Hz frequency, 40°C rating, A.I.C. values, lug arrangement, and 4.50" W × 8.00" H × 3.69"D dimensions against the requirements of the existing equipment.