LAL36000M - 400 Amp Molded Case Switch

LAL36000M - 400 Amp Molded Case Switch

The LAL36000M is a 400-amp, 3-pole Type LAL molded case switch with a cable-in/cable-out configuration. If you're matching one for equipment already in service, compare a few numbers side by side before installation. For an existing or legacy application, verify the LAL type, 400A rating, three-pole configuration, physical size, cable arrangement, and electrical ratings against the equipment requirements. When those details line up and the switch is properly installed and used within its intended application, it's built to last.

Key Features and Benefits

• 400 Amp Rating: Rated at 400A for applications requiring this specific current rating.
• 3-Pole Design: Three-pole configuration for compatible electrical equipment.
• Type LAL: Provides a clear type designation to check against the existing switch and equipment documentation.
• Molded Case Switch: Intended to perform a switching function and does not provide overcurrent protection.
• Cable-In/Cable-Out Configuration: Designed for compatible applications using this connection arrangement.
• Suited to Replacement Work: A replacement option where the part number, type, electrical ratings, physical dimensions, and connection configuration match the existing application.
  

Technical Specifications

• Part Number: LAL36000M
  
• Product Type: Molded Case Switch
  
• Type: LAL
  
• Amperage: 400A
  
• Poles: 3
  
• Configuration: Cable-in/Cable-out
  
• Overcurrent Protection: None
  
• AIC Rating: 22kA at 600VAC
  
• AIC Rating: 30kA at 480VAC
  
• AIC Rating: 42kA at 240VAC
  
• Height: 11.0 in.
  
• Width: 6.0 in.
  
• Depth: 4.06 in.
  
• Approximate Shipping Weight: 22.0 lbs.
  

Material Compliance and Certifications

No specific UL, CSA, RoHS, REACH, or other certification or material-compliance information was supplied for the LAL36000M. Rather than assume a listing or certification from the product family, confirm any required compliance information from the markings on the actual device and applicable equipment documentation.

Where It Works Best

The LAL36000M makes the most sense in compatible existing or legacy equipment that specifically calls for a 400A, 3-pole Type LAL molded case switch with a cable-in/cable-out configuration.

For replacement work, the catalog number is a useful starting point, but the physical and electrical details deserve the same attention. Compare the 400A rating, three poles, Type LAL designation, 11" x 6" x 4.06" footprint, cable configuration, and applicable interrupting rating with the device being replaced and the requirements of the equipment.