NA2P70 - 70Amp Circuit Breaker Description
NA2P70 - 70Amp Circuit Breaker
Need an NA2P70 circuit breaker for an existing installation? This 70-amp, 2-pole breaker is designed for applications that use the NA-style stab-on configuration. It is rated 10 kA.I.C. at 120/240VAC and uses a thermal-magnetic trip mechanism.
Fit matters with older electrical equipment, so the physical details matter. The NA2P70 measures approximately 3.38 inches high, 2.0 inches wide, and 2.31 inches deep. For our New offering, we provide a newly manufactured aftermarket replacement made specifically to fit the existing NA2P70 location. The goal isn't to change or upgrade the system—it's to provide the correct form, fit, and function for equipment that requires this breaker configuration.
If you're maintaining existing equipment and need a 70-amp, 2-pole stab-on circuit breaker, the NA2P70 replacement provides the familiar dimensions, connection style, and electrical ratings needed for a compatible application. It's straightforward, purpose-built, and made to last.
Key Features and Benefits
- 70 amp, 2-pole configuration for compatible NA applications.
- Thermal-magnetic trip mechanism for the breaker's intended circuit protection function.
- Stab-on design made for compatible equipment using this connection style.
- Rated 10 kA.I.C. at 120/240VAC.
- The New version is an aftermarket replacement specifically designed to fit the existing NA2P70 location.
- Compact 3.38" x 2.0" x 2.31" dimensions help maintain the required form and fit.
- Built to last for use in compatible electrical equipment.
Technical Specifications
-
Part Number: NA2P70
-
Type: NA
-
Amperage: 70 A
-
Poles: 2
-
Voltage Rating: 120/240VAC
-
A.I.C. Rating: 10k
-
Trip Type: Thermal Magnetic
-
Connection: Stab-On
-
Height: 3.38 in.
-
Width: 2.0 in.
-
Depth: 2.31 in.
- Ship Weight: 2.5 lbs.
Material Compliance and Certifications
The available product specifications did not include specific material compliance information, certifications, or agency listings. Confirm these for the specific breaker supplied when a certification or compliance requirement applies to the installation.
Where It Works Best
The NA2P70 70 amp circuit breaker is intended for compatible legacy electrical equipment that requires an NA-style, 2-pole stab-on breaker with these physical and electrical specifications. It's particularly useful when the job calls for maintaining the existing breaker position and configuration rather than changing the equipment.
Before replacing an existing breaker, check more than just the amperage. Confirm the part number, breaker type, number of poles, voltage, A.I.C. rating, stab-on connection, dimensions, and equipment compatibility. Electrical installation should follow applicable equipment requirements and electrical codes and be handled by qualified personnel.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:2.0
- Height:3.38
- Depth:2.31
- Poles:2
- Amperes:70
- A.I.C. Rating & Volts:10k @ 120/240VAC
- Type:NA
- Approx Dimensions:2.00"W x 3.38"L x 2.31"D
- Additional Notes:Stab-On, Thermal Magnetic Circuit Breaker.*Note: For the *New* offering, as this item is no longer manufactured by FPE, in it's place, we are offering a New after-market replacement circuit breaker specially designed to replace and fit into the existing location of the NA2P70 - discontinued by the manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a refund, subject to our Return Policy.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).