PCG32500F - 2500 Amp Max. *Frame Only*

PCG32500F - 2500 Amp Max. *Frame Only*

When you're replacing a breaker in an existing electrical system, getting the details right matters. The PCG32000F is a Type PCG, 2500A, 3-pole SELTRONIC circuit breaker frame designed for applications requiring this specific configuration. It carries an interrupting rating of 100k AIC at 600VAC, 100k AIC at 480VAC, and 125k AIC at 240VAC. This is a 160-cycle frame with standard long-delay, magnetic, and ground-fault trip functions. At approximately 22 inches high, 12 inches wide, and 9 inches deep, the PCG32000F is particularly useful for maintaining an existing or legacy electrical distribution system where the original form, fit, and electrical ratings must be matched. Instead of choosing a breaker based on amperage alone, compare the complete specifications with the equipment already in place. For the right application, the PCG32000F provides a straightforward way to keep compatible equipment in service. It's a practical electrical component that's built to last when properly installed, applied, and maintained.

Key Features and Benefits

• 2500A rating for systems designed around this amperage requirement.
• Three-pole configuration for compatible three-pole electrical applications.
• Type PCG frame for equipment requiring the PCG form and fit.
• SELTRONIC configuration with standard long-delay, magnetic, and ground-fault trip functions.
• 160-cycle specification for applications requiring this particular configuration.
• Rated 100k AIC at 600VAC and 480VAC, and 125k AIC at 240VAC.
• A practical option for maintaining existing and legacy electrical distribution equipment.
• Dimensions of 22 x 12 x 9 inches help when checking physical compatibility before installation.
• Built to last for its intended application when correctly installed and maintained.

Technical Specifications

• Part Number: PCG32000F
  
• Type: PCG
  
• Configuration: SELTRONIC Circuit Breaker Frame Only
  
• Amperes: 2500A
  
• Poles: 3
  
• AIC @ 600VAC: 100k
  
• AIC @ 480VAC: 100k
  
• AIC @ 240VAC: 125k
  
• Cycle: 160
  
• Trip Functions: Standard Long Delay, Magnetic, Ground Fault
  
• Height: 22.0 in.
  
• Width: 12.0 in.
  
• Depth: 9.0 in.
  

Material Compliance and Certifications

• Specific details regarding materials, certifications, listings, and environmental compliance are not included in the available specifications for the PCG32000F. UL, RoHS, REACH, or other compliance status should not be assumed without supporting documentation.
• If certification or code compliance is important for your application, check the breaker markings, equipment documentation, and applicable installation requirements before putting the unit into service.

Where It Works Best

• The PCG32000F is best suited to existing electrical distribution equipment that was designed for a Type PCG 2500A, 3-pole circuit breaker frame with the corresponding SELTRONIC configuration. That makes it especially relevant for maintenance work in industrial facilities, commercial buildings, plants, and other locations where compatible legacy electrical equipment remains in service.
  
• Compatibility deserves a careful check. Two breakers with the same amp rating aren't automatically interchangeable. Before installation, compare the part number, PCG type, 2500A rating, three-pole configuration, voltage and AIC ratings, dimensions, cycle specification, trip functions, mounting, connections, and other equipment requirements with the breaker or system you're working on. The objective is simple: make sure the replacement provides the correct form, fit, and function for the existing application.