PDG21G0015TFFJ - 15 Amp Circuit Breaker

PDG21G0015TFFJ - 15 Amp Circuit Breaker

Looking for the Eaton PDG21G0015TFFJ? This Power Defense molded-case circuit breaker is a 15-amp, 1-pole, Frame 2 breaker with a 35 kA interrupting rating at 277 VAC. It has a fixed trip and comes with line and load lugs, making the basic configuration easy to identify when you're checking it against an existing breaker or a project's electrical requirements. The breaker measures 1.38 inches high, 6 inches wide, and 3.5 inches deep. It's a practical option for maintenance, replacement, retrofitting, and other compatible electrical applications that require these exact ratings. When replacing a breaker, it's always worth checking the complete specifications, not just the amperage, to make sure the frame, pole count, voltage, interrupting rating, trip type, and connections match the equipment.

Key Features and Benefits

• 15A rating for compatible 15-amp circuit protection applications.
• Single-pole design for equipment requiring a 1-pole breaker.
• Rated 35kA at 277 VAC, giving you a clearly defined interrupting capacity to match against system requirements.
• Fixed trip configuration keeps the setup simple and clearly specified.
• Built on the Power Defense Frame 2 platform.
• Supplied with line and load lugs for compatible electrical connections.
• Measures just 1.38" H x 6.0" W x 3.5" D, an important detail when checking physical fit.
• The full PDG21G0015TFFJ part number makes it easier to verify that you're looking at the intended breaker rather than a similar model with different ratings.

Technical Specifications

• Manufacturer: Eaton
  
• Part Number: PDG21G0015TFFJ
  
• Product Type: Molded Case Circuit Breaker
  
• Product Family: Global Rated Power Defense
  
• Frame: Frame 2
  
• Poles: 1
  
• Amperage: 15A
  
• A.I.C. Rating: 35kA @ 277 VAC
  
• Trip: Fixed
  
• Lugs: Line and Load
  
• Dimensions:
  • Height: 1.38 in.
  • Width: 6.0 in.
  • Depth: 3.5 in.

Material Compliance and Certifications

• Specific material-compliance information and certification details were not included in the available specifications for the PDG21G0015TFFJ. If your job requires a specific agency listing, certification, or material compliance standard, check the applicable manufacturer documentation before using the breaker in that application.

Where It Works Best

• The PDG21G0015TFFJ makes sense when the job specifically calls for a 15A, 1-pole Power Defense Frame 2 molded case circuit breaker with a 35kA rating at 277 VAC. It may be used in compatible electrical distribution equipment for maintenance work, breaker replacement, retrofit projects, or new installations.
  
• If you're replacing an existing breaker, start with the part number, but don't stop there. Compare the 15A rating, single-pole configuration, 35kA @ 277 VAC rating, Frame 2 design, fixed trip, line and load lugs, and physical dimensions with your equipment's requirements. A close-looking breaker isn't necessarily an interchangeable breaker, so verifying the complete specification is the safer approach.