PDG21G0015TFFL - 15 Amp Circuit Breaker

PDG21G0015TFFL - 15 Amp Circuit Breaker

When you're replacing a circuit breaker, getting the details right matters. The Eaton PDG21G0015TFFL is a 15A, 1-pole molded-case circuit breaker from the Global Rated Power Defense line. This Frame 2 breaker has a 35kA interrupting rating at 277 VAC and comes with a fixed trip and load lugs. That combination makes it a practical option for compatible commercial and industrial electrical equipment that requires these specific ratings. It measures approximately 1.38" high x 6.0" wide x 3.5" deep, so you can compare the dimensions along with the electrical specifications when checking your application. If PDG21G0015TFFL is the part number you're trying to match, the important things to confirm are the 15-amp rating, single-pole configuration, Frame 2 design, 35kA rating at 277 VAC, fixed trip, and lug arrangement.

Key Features and Benefits

• 15-amp rating for applications requiring 15A circuit protection.
• 1-pole design for compatible single-pole installations.
• 35kA interrupting rating at 277 VAC for the specified voltage and fault-current requirements.
• Fixed trip configuration keeps the breaker setup straightforward.
• Frame 2 design from the Global Rated Power Defense product line.
• Load lugs are included in this configuration.
• Clearly identified by part number PDG21G0015TFFL, which is especially helpful when matching an existing breaker.
• Compact dimensions make it easier to check the available space and physical fit before installation.

Technical Specifications

• Part Number: PDG21G0015TFFL
  
• Product Type: Molded Case Circuit Breaker
  
• Product Line: Global Rated Power Defense
  
• Frame: Frame 2
  
• Poles: 1
  
• Amperage: 15A
  
• A.I.C. Rating: 35kA at 277 VAC
  
• Trip: Fixed
  
• Lugs: Load Lugs
  
• Dimensions:
  • Height: 1.38 in.
  • Width: 6.0 in.
  • Depth: 3.5 in.

Material Compliance and Certifications

• Material compliance and certification information was not included with the specifications available for this breaker. Because certification requirements can depend on the equipment and installation, check the applicable manufacturer documentation before use. Required listings, approvals, electrical ratings, and local code requirements should always be verified for the specific application.

Where It Works Best

• The PDG21G0015TFFL is intended for compatible electrical applications requiring a 15A, single-pole molded-case circuit breaker with a 35kA rating at 277 VAC. It may be a good match for commercial or industrial electrical distribution equipment, maintenance work, and replacement situations where the existing equipment specifically requires these characteristics.
  
• Replacing an existing breaker? Check more than the amp rating. Compare the part number, frame, pole count, voltage, interrupting rating, fixed-trip configuration, lug arrangement, and physical dimensions with the breaker and equipment already in place. That extra check can help prevent choosing a breaker that looks similar on paper but isn't the correct match for the application. Installation should be performed by qualified electrical personnel and in accordance with applicable codes and manufacturer requirements.