PDG21G0030TFFJ - 30 Amp Circuit Breaker

PDG21G0030TFFJ - 30 Amp Circuit Breaker

The Eaton PDG21G0030TFFJ is a 30A single-pole molded-case circuit breaker from the Global Rated Power Defense line. This particular model is a Frame 2 breaker with a fixed trip and line and load lugs. Its interrupting rating is 35kA at 277 VAC. The breaker measures approximately 1.38 inches high, 6 inches wide, and 3.5 inches deep. If you're trying to replace an existing breaker, it's worth checking all these details rather than relying on the 30A rating alone. Pole count, frame, trip type, voltage, interrupting rating, and lug setup can all make a difference. For equipment that calls for part number PDG21G0030TFFJ, this provides the specific 30A, 1-pole configuration you're looking for.

Key Features and Benefits

• 30A, 1-pole configuration for equipment designed around these ratings.
• 35kA interrupting rating at 277 VAC.
• Fixed trip design.
• Supplied with line and load lugs.
• Uses the Frame 2 configuration.
• Part of the Eaton Global Rated Power Defense molded case breaker line.
• Measures approximately 1.38" H x 6" W x 3.5" D, which is useful information when checking available space or comparing it with an existing breaker.
• The fullThe full model number PDG21G0030TFFJ provides a more accurate way to identify the breaker than simply matching the amperage.

Technical Specifications

• Manufacturer: Eaton
  
• Part Number: PDG21G0030TFFJ
  
• Type: Molded Case Circuit Breaker
  
• Series: Global Rated Power Defense
  
• Frame: Frame 2
  
• Poles: 1
  
• Amperage: 30A
  
• A.I.C. Rating & Voltage: 35kA @ 277 VAC
  
• Trip: Fixed
  
• Lugs: Line and Load
  
• Dimensions:
  • Height: 1.38 in.
  • Width: 6.0 in.
  • Depth: 3.5 in.

Material Compliance and Certifications

• No specific material compliance or certification information was included with the available specifications for the PDG21G0030TFFJ. If a specific certification or material standard is required for the job, verify it by checking the markings on the breaker and the manufacturer's documentation for this exact part number. Specifications from a similar-looking model shouldn't be assumed to apply.

Where It Works Best

• This breaker is intended for compatible electrical equipment requiring a 30-amp, 1-pole molded-case circuit breaker rated at 35 kA at 277 VAC. Its Frame 2 construction, fixed trip, and line-and-load lug arrangement should also match the equipment's requirements.
• For replacement work, start with the full PDG21G0030TFFJ number. Then check the electrical ratings and physical configuration. That's important because breakers with the same amperage aren't automatically interchangeable.
• In short, if the equipment calls for a PDG21G0030TFFJ with a 30A rating, single-pole design, Frame 2 size, fixed trip, lugs, and 35kA at 277 VAC specifications, this is the configuration to look for.