PDG21G0030TFFL - 30 Amp Circuit Breaker

PDG21G0030TFFL - 30 Amp Circuit Breaker

The Eaton PDG21G0030TFFL is a 30-amp, single-pole molded-case circuit breaker from the Power Defense line. It's a Frame 2 breaker with a fixed trip and load lugs, intended for electrical equipment that requires this specific configuration. The supplied rating is 35 kA at 277 VAC. For anyone replacing an existing breaker, it's worth checking more than the amperage printed on the label. Frame size, pole count, trip style, interrupting rating, and connections can vary even between breakers that look very similar. The PDG21G0030TFFL measures 1.38 inches high, 6 inches wide, and 3.5 inches deep, so those dimensions can also be checked against the equipment or breaker being replaced. Simply put, this is a practical option when your application calls for a 30A, 1-pole Power Defense Frame 2 circuit breaker with a fixed trip and load-lug configuration.

Key Features and Benefits

• Rated at 30 amps
• 1-pole breaker configuration
• 35 kA @ 277 VAC interrupting rating, based on the supplied specifications
• Power Defense Frame 2
• Fixed trip design
• Load lugs included
• Molded case construction
• Useful for replacement and maintenance applications when the existing equipment calls for the same breaker specifications

Technical Specifications

• Manufacturer: Eaton
  
• Part Number: PDG21G0030TFFL
  
• Product Line: Power Defense
  
• Breaker Type: Molded Case Circuit Breaker
  
• Frame: 2
  
• Poles: 1
  
• Amperage: 30A
  
• A.I.C. Rating & Volts: 35 kA @ 277 VAC*
  
• Trip: Fixed
  
• Connections: Load Lugs
  
• Dimensions:
  • Height: 1.38 in.
  • Width: 6.0 in.
  • Depth: 3.5 in.

*Electrical rating shown from the specifications supplied for this product. Confirm the required ratings before installation.

Material Compliance and Certifications

• The PDG21G0030TFFL is RoHS-compliant and carries applicable product approvals and standards, including UL 489, CSA, IEC 60947-2, and CCC. Requirements can vary depending on the equipment and installation, so the breaker specifications and the manufacturer's current documentation should be checked before use.

Where It Works Best

• This breaker is suited for compatible electrical distribution equipment that requires a 30A single-pole molded-case breaker in the Power Defense Frame 2 platform. It can be a useful choice for equipment maintenance, electrical system repairs, commercial applications, and replacement work where the original breaker specifications match.
• If you're replacing an existing unit, start with the catalog number. PDG21G0030TFFL identifies a much more specific configuration than "30 amp circuit breaker" alone. Check the part number, pole count, frame, trip, interrupting rating, and connection type before making the replacement.