PDG21G0035TFFL - 35 Amp Circuit Breaker

PDG21G0035TFFL - 35 Amp Circuit Breaker

When you're replacing a circuit breaker, getting the details right matters. The Eaton PDG21G0035TFFL is a 35A, 1-pole molded case circuit breaker from the Global Rated Power Defense family. This Frame 2 breaker has an interrupting rating of 35kA at 277 VAC and comes with a fixed trip and load lugs.

For maintenance teams, electricians, and facilities professionals, the specifications make it easy to compare this breaker with an existing unit. It measures approximately 1.38 inches high, 6.0 inches wide, and 3.5 inches deep. If you're replacing an installed breaker, check the full PDG21G0035TFFL part number along with the amperage, number of poles, A.I.C. rating, voltage, trip type, lug configuration, frame, and dimensions. A similar-looking breaker isn't necessarily the right match.

Key Features and Benefits

• 35A rating for applications requiring a 35-amp breaker.
• Single-pole design for compatible 1-pole circuit protection applications.
• 35kA interrupting rating at 277 VAC for systems requiring this specific rating.
• Fixed trip configuration with predetermined trip characteristics.
• Load lugs included as part of the breaker configuration.
• Frame 2 design from the Global Rated Power Defense molded case circuit breaker family.
• Clearly identified specifications make it easier to compare the breaker with existing equipment requirements.

Technical Specifications

• Part Number: PDG21G0035TFFL
  
• Product Type: Molded Case Circuit Breaker
  
• Product Family: Global Rated Power Defense
  
• Frame: Frame 2
  
• Poles: 1
  
• Amperage: 35A
  
• A.I.C. Rating & Voltage: 35kA @ 277 VAC
  
• Trip Type: Fixed
  
• Lugs: Load Lugs
  
• Dimensions:
  • Height: 1.38 in.
  • Width: 6.0 in.
  • Depth: 3.5 in.

Material Compliance and Certifications

• Material compliance, certification, and listing information were not provided in the available specifications for the PDG21G0035TFFL. If your project calls for a specific certification, listing, or material compliance standard, confirm the requirements and documentation for this exact part number before installation. This is especially important when the breaker is specified for equipment or a facility subject to defined regulatory requirements.

Where It Works Best

• The PDG21G0035TFFL is best suited for compatible electrical equipment that specifically calls for a 35A, 1-pole molded-case circuit breaker with a 35kA interrupting rating at 277 VAC. It may be suitable for maintenance, replacement, equipment servicing, or system upgrade work when all required electrical and physical specifications match.
• Already have a breaker you're trying to replace? Start with the complete part number, but don't stop there. Compare the 35A rating, 1-pole configuration, 35kA @ 277 VAC rating, Frame 2 design, fixed trip, load lugs, and dimensions with the requirements of the existing equipment. That extra check can help avoid choosing a breaker based only on appearance or amperage.
• Final compatibility and installation requirements should be verified by qualified electrical personnel using the applicable equipment documentation and electrical codes.