PDG21M0025TFFL - 25 Amp Circuit Breaker

PDG21M0025TFFL - 25 Amp Circuit Breaker

Need an Eaton PDG21M0025TFFL for a new installation or to match an existing breaker? Start with the specs that matter. This Power Defense molded-case circuit breaker is a Frame 2, 1-pole, 25-amp breaker with a 65 kA interrupting rating at 277 VAC. It comes with fixed trip and load lugs, providing a straightforward configuration for compatible electrical distribution equipment. The breaker measures 1.38 inches high, 6 inches wide, and 3.5 inches deep. For electricians, maintenance teams, and facility personnel, those details make it easier to compare the PDG21M0025TFFL against the breaker being replaced or the requirements listed for a particular job. Instead of choosing by amperage alone, check the full configuration—including the pole count, voltage, A.I.C. rating, trip type, connections, and physical size—to make sure this is the right breaker for your application.

Key Features and Benefits

• Made for compatible circuits calling for a 25-amp breaker.
• The PDG21M0025TFFL is a 1-pole configuration.
• 65kA at 277 VAC provides the specified interrupting capacity for applications requiring this fault-current rating.
• A simple, defined trip configuration with no adjustable trip setting.
• Part of Eaton's globally rated Power Defense molded case circuit breaker line.
• Configured with load-side lugs for compatible connections.
• The exact ratings and dimensions give you several important points to compare when matching an existing breaker.
  

Technical Specifications

• Manufacturer: Eaton
  
• Part Number: PDG21M0025TFFL
  
• Series: Power Defense
  
• Breaker Type: Molded Case Circuit Breaker
  
• Frame: Frame 2
  
• Poles: 1
  
• Amperage: 25A
  
• A.I.C. Rating: 65kA @ 277 VAC
  
• Trip: Fixed
  
• Lugs: Load Lugs
  
• Height: 1.38 in.
  
• Width: 6.0 in.
  
• Depth: 3.5 in.
  

Material Compliance and Certifications

• The PDG21M0025TFFL is part of Eaton's globally rated Power Defense molded case circuit breaker family. Certification and material-compliance requirements can vary with the exact breaker configuration and application, so these details should be verified against the manufacturer's documentation and markings for this specific catalog number. This is especially important when a project requires a specific listing, approval, or material compliance standard.
  

Where It Works Best

• The Eaton PDG21M0025TFFL 25A circuit breaker is suitable for compatible commercial, industrial, and electrical distribution equipment that requires a 1-pole, fixed-trip molded case circuit breaker with these ratings. Its 65kA rating at 277 VAC is an important consideration in installations where the specified available fault current requires that level of interrupting capacity.
• Replacing an existing breaker? Match the complete specification rather than stopping at "25 amp." Two breakers can have the same amperage and still be very different products. Compare the PDG21M0025TFFL part number, Frame 2 design, 1-pole configuration, 277 VAC rating, 65 kA A.I.C., fixed trip, load-lug configuration, and dimensions with your equipment requirements before installation.