PDG21M0035TFFL - 35 Amp Circuit Breaker

PDG21M0035TFFL - 35 Amp Circuit Breaker

When the job calls for a 35A single-pole molded-case circuit breaker, getting the specifications right matters. The Eaton PDG21M0035TFFL is part of the Power Defense line and comes in a Frame 2 configuration with a fixed trip and load lugs. It is rated 65 kA at 277 VAC, making it a good match for compatible electrical systems that require this level of interrupting capacity. The breaker measures 1.38 inches high, 6 inches wide, and 3.5 inches deep so that you can compare its electrical ratings and physical dimensions with your existing equipment before installation. For electricians, maintenance teams, and facility professionals, the appeal is pretty simple: you get a clearly specified 35-amp Power Defense circuit breaker without unnecessary complexity. If PDG21M0035TFFL is the part number your equipment calls for, these specifications help confirm you're looking at the right breaker.

Key Features and Benefits

• 35-amp rating for applications designed around a 35A breaker
• 1-pole configuration for compatible single-pole circuits
• 65kA interrupting rating at 277 VAC for applications requiring this fault-current rating
• Fixed trip provides a straightforward, non-adjustable trip configuration
• Load lugs included as part of the breaker configuration
• Power Defense Frame 2 design for compatible electrical distribution equipment
• Clearly defined dimensions help when checking fit for maintenance or replacement work
  

Technical Specifications

• Part Number: PDG21M0035TFFL
  
• Manufacturer: Eaton
  
• Series: Power Defense
  
• Product Type: Molded Case Circuit Breaker
  
• Frame: Frame 2
  
• Poles: 1
  
• Amperage: 35A
  
• A.I.C. Rating & Voltage: 65kA @ 277 VAC
  
• Trip: Fixed
  
• Lugs: Load Lugs
  
• Height: 1.38 in.
  
• Width: 6.0 in.
  
• Depth: 3.5 in.
  

Material Compliance and Certifications

• This model is identified as a globally rated Power Defense molded-case circuit breaker. Specific certification, listing, and material-compliance information should be confirmed against the product label and current manufacturer documentation, particularly when a project or facility has specific approval requirements.
• Rather than assuming certifications that may vary by configuration, check the breaker markings before installation when UL, IEC, environmental, or other compliance requirements apply.
  

Where It Works Best

• The PDG21M0035TFFL makes sense in compatible commercial and industrial electrical distribution systems where the specified breaker is 35A, 1-pole, fixed-trip, and 65kA at 277 VAC. It can be used for maintenance, equipment servicing, electrical distribution work, and replacement applications when these specifications match the system requirements.
• If you're replacing an existing breaker, start with the part number—but don't stop there. Check the amperage, number of poles, voltage, interrupting rating, frame, trip type, lug configuration, and dimensions as well. Breakers that look similar aren't necessarily interchangeable, so confirming the complete set of specifications is an important part of selecting the right component.