PDG22M0200TFFL - 200 Amp Circuit Breaker
- 200 Amp
- 65k @ 480 VAC
- 2 Pole
Purchase Options:
PDG22M0200TFFL - 200 Amp Circuit Breaker Description
PDG22M0200TFFL - 200 Amp Circuit Breaker
When you're matching a breaker to an existing electrical system, the details matter. The Eaton PDG22M0200TFFL is a 200A, 2-pole molded case circuit breaker from the Global Rated Power Defense family. It uses a Frame 2 design and comes with a fixed trip and load lugs. Its interrupting rating is 65 kA at 480 VAC, providing the fault-current rating required for compatible applications with these specifications.
Space can matter just as much as electrical ratings, especially when you're working inside existing equipment. The PDG22M0200TFFL measures approximately 2.76 inches high, 6 inches wide, and 3.5 inches deep. Whether you're working on a replacement or specifying components for an electrical project, check the full part number and ratings rather than relying on amperage alone. Pole count, frame size, trip configuration, interrupting capacity, and physical dimensions must all match the equipment requirements.
Key Features and Benefits
- 200-amp rating for applications requiring a 200A breaker.
- 2-pole configuration for compatible electrical distribution equipment.
- Rated 65kA at 480 VAC for fault-current interruption.
- Fixed trip configuration keeps the setup straightforward.
- Load lugs included as part of the specified breaker configuration.
- Frame 2 construction within the Global Rated Power Defense family.
- Measures just 2.76" H x 6.0" W x 3.5" D, making dimensions easy to compare with an existing breaker or installation space.
- Clearly identified by catalog number PDG22M0200TFFL, helping avoid confusion with breakers that may look similar but carry different electrical ratings.
Technical Specifications
-
Manufacturer: Eaton
-
Part Number: PDG22M0200TFFL
-
Series: Global Rated Power Defense
-
Product Type: Molded Case Circuit Breaker
-
Frame: Frame 2
-
Poles: 2
-
Amperage: 200A
-
A.I.C. Rating: 65kA @ 480 VAC
-
Trip: Fixed
-
Lugs: Load Lugs
-
Height: 2.76 in.
-
Width: 6.0 in.
-
Depth: 3.5 in.
Material Compliance and Certifications
- Material compliance, agency listings, certifications, and environmental requirements should be checked against current manufacturer documentation for the exact PDG22M0200TFFL part number. We don't want to make assumptions about certifications that haven't been specifically confirmed for this breaker.
- For applications that require a specific listing or compliance standard, verify those requirements, along with the breaker's electrical specifications, before installation.
Where It Works Best
- The PDG22M0200TFFL makes sense for compatible commercial and industrial electrical distribution applications that call for a 200A, 2-pole molded-case circuit breaker with a 65kA rating at 480 VAC. It may also be suitable for replacement situations where the existing equipment specifically requires the same Frame 2 configuration, fixed trip, load lugs, dimensions, and electrical ratings.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Edison®, Edison Fuse®, GTE Sylvania®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Height:2.76
- Width:6.0
- Depth:3.5
- Poles:2
- Amperes:200
- A.I.C. Rating & Volts:65k @ 480 VAC
- Approx Dimensions:6.00"H x 2.76" W x 3.50"D
- Additional Notes:Eaton Global Rated Power Defense molded case circuit breaker, Frame 2, 2 Pole, 200A, 65kA@480V, with Fixed trip and load lugs
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).