PDG23G0175TFFL - 175 Amp Circuit Breaker

PDG23G0175TFFL - 175 Amp Circuit Breaker

Need a 175A breaker for a compatible three-phase application? The Eaton PDG23G0175TFFL is a Power Defense Global Rated molded-case circuit breaker built around a straightforward set of specs: 3 poles, 175 amps, and a 35 kA interrupting rating at 480 VAC. It uses Eaton's Frame 2 design and comes with a fixed trip and load lugs. That makes it a practical option when your equipment requires this specific breaker configuration, and you don't need an adjustable trip setting. At approximately 4.19 inches high, 6 inches wide, and 3.5 inches deep, it also packs its protection into a relatively compact footprint. For maintenance teams, electricians, and facilities that work with compatible power distribution equipment, the PDG23G0175TFFL provides essential ratings in an easy-to-identify molded-case design.

Key Features and Benefits

• 175-amp rating for applications designed around this current level.
• 3-pole configuration for compatible three-phase electrical systems.
• 35kA interrupting capacity at 480 VAC for the specified fault-current protection requirements.
• Fixed trip design keeps the protection setup simple when adjustable trip settings aren't required.
• Frame 2 construction provides the specified ratings in a compact, molded-case format.
• Load lugs included for compatible load-side connections.
• Compact size helps when working with equipment where available space is limited.

Technical Specifications

• Manufacturer: Eaton
  
• Part Number: PDG23G0175TFFL
  
• Product Line: Power Defense Global Rated
  
• Type: Molded Case Circuit Breaker
  
• Frame: Frame 2
  
• Poles: 3
  
• Amperage: 175A
  
• A.I.C. Rating: 35kA at 480 VAC
  
• Trip: Fixed
  
• Lugs: Load Lugs
  
• Height: 4.19 in.
  
• Width: 6.0 in.
  
• Depth: 3.5 in.
  

Material Compliance and Certifications

• The PDG23G0175TFFL is part of Eaton's Power Defense Global Rated circuit breaker family. Specific agency certifications and material-compliance information should be confirmed using the current manufacturer documentation and the markings on the individual breaker. This is particularly important when an installation or project specification calls for a particular approval or compliance standard.

Where It Works Best

• This breaker is a good fit for compatible commercial and industrial electrical systems that require a 175A, 3-pole molded-case circuit breaker rated at 35kA at 480 VAC. Typical applications may include compatible power distribution equipment, facility electrical systems, and machinery power applications.
  
• Replacing an existing breaker? Check the whole specification rather than amperage alone. You'll want to match the PDG23G0175TFFL part number, three-pole configuration, 175A rating, Frame 2 size, fixed trip, load lugs, interrupting rating, and physical dimensions against the requirements of your equipment. Two breakers can look similar on paper while being intended for very different applications.