PDG23M0110TFFJ - 110 Amp Circuit Breaker

PDG23M0110TFFJ - 110 Amp Circuit Breaker

The Eaton PDG23M0110TFFJ is a 110-amp, 3-pole molded-case circuit breaker from the Power Defense line. It's a Frame 2 breaker with a 65 kA interrupting rating at 480 VAC, making it a solid option for commercial and industrial electrical systems that require these ratings. The breaker has a fixed trip and comes with line and load lugs, so there's no need to sort through a long list of options to understand what you're getting. Size matters when you're working with existing equipment, too. The PDG23M0110TFFJ measures 4.19 inches high, 6 inches wide, and 3.5 inches deep. If you're replacing a breaker or working from an equipment specification, take a minute to compare the full part number, amperage, number of poles, interrupting rating, trip configuration, and dimensions. Getting those details right up front can save a lot of trouble later.

Key Features and Benefits

• 110A rating for compatible commercial and industrial power applications.
• 3-pole design for systems requiring three-pole circuit protection.
• 65kA interrupting rating at 480 VAC for applications with the corresponding fault-current requirements.
• Fixed trip keeps the configuration straightforward.
• Line and load lugs are included in the breaker configuration.
• Frame 2 Power Defense design provides a compact breaker package for compatible equipment.
• At 4.19" H x 6.0" W x 3.5" D, the dimensions are easy to check against the available installation space.

Technical Specifications

• Part Number: PDG23M0110TFFJ
  
• Manufacturer: Eaton
  
• Series: Global Rated Power Defense
  
• Product Type: Molded Case Circuit Breaker
  
• Frame: Frame 2
  
• Poles: 3
  
• Amperage: 110A
  
• A.I.C. Rating: 65kA @ 480 VAC
  
• Trip: Fixed
  
• Lugs: Line & Load
  
• Height: 4.19 in.
  
• Width: 6.0 in.
  
• Depth: 3.5 in.
  

Material Compliance and Certifications

• Material compliance, certifications, and agency approvals should be checked against the current manufacturer documentation and product labeling for part number PDG23M0110TFFJ. Requirements can differ from one installation or project to another, so it's worth confirming the applicable listings and compliance information before installation rather than assuming that another Power Defense breaker carries the same approvals.

Where It Works Best

• The PDG23M0110TFFJ circuit breaker is intended for compatible electrical systems that need a 110A, 3-pole breaker with a 65kA rating at 480 VAC. Typical uses may include commercial electrical distribution equipment, industrial power systems, machinery applications, and other compatible three-phase installations.
  
• It's also a practical replacement candidate when an existing application specifically calls for Eaton part number PDG23M0110TFFJ. Don't rely on amperage alone when checking a replacement. The pole count, voltage, interrupting requirements, trip type, lug configuration, dimensions, and equipment compatibility all matter.