PDG23M0150TFFL - 150 Amp Circuit Breaker

PDG23M0150TFFL - 150 Amp Circuit Breaker

The Eaton PDG23M0150TFFL is a 150A, 3-pole molded-case circuit breaker from the Power Defense line. Built on the Frame 2 platform, it has a 65 kA interrupting rating at 480 VAC and uses a fixed thermomagnetic trip for overload and short-circuit protection. That makes it a straightforward choice for commercial and industrial electrical systems that require this specific breaker configuration. The PDG23M0150TFFL also comes with standard load-side terminals and carries multiple recognized certifications for use in properly rated equipment. If you're replacing an existing breaker, matching the complete part number is important. Amperage and pole count are only part of the equation; frame size, trip type, interrupting rating, voltage, terminals, and physical dimensions must also match the application.

Key Features and Benefits

• 150-amp rating for compatible commercial and industrial electrical applications
• 3-pole configuration for systems requiring three-pole circuit protection
• 65 kA interrupting capacity at 480 VAC for applications with higher available fault current
• Fixed thermomagnetic trip provides overload and short-circuit protection without adjustable electronic settings
• Frame 2 Power Defense design combines substantial circuit protection capability with a relatively compact footprint
• Standard load-side terminals included as part of this breaker configuration
• Clearly identified as PDG23M0150TFFL, helping make exact-match replacement and specification checks easier

Technical Specifications

• Manufacturer: Eaton
  
• Part Number: PDG23M0150TFFL
  
• Product Family: Power Defense
  
• Product Type: Molded Case Circuit Breaker (MCCB)
  
• Frame: Frame 2
  
• Poles: 3
  
• Amperage: 150A
  
• Interrupting Rating: 65 kA at 480 VAC
  
• Maximum Voltage: 600 VAC
  
• Trip Type: Fixed Thermomagnetic
  
• Terminals: Standard, Load Side
  
• Height: 6.0 in.
  
• Width: 4.12 in.
  
• Depth: 3.5 in.
  
• Approximate Weight: 4.01 lb.
  

Material Compliance and Certifications

• The PDG23M0150TFFL Power Defense circuit breaker is RoHS compliant and is associated with several widely recognized electrical standards and certifications, including:
  • UL 489
  • IEC 60947-2
  • CSA
  • CCC
  • RoHS compliance
• These certifications can be important when matching a breaker to the requirements of a particular piece of equipment or electrical installation. Always check the applicable system specifications and electrical codes before installation.

Where It Works Best

• This breaker is a good fit for commercial and industrial power distribution, electrical equipment, machinery, control systems, and replacement applications that call for its specific ratings. Its combination of 150A capacity, three-pole configuration, fixed thermomagnetic protection, and a 65 kA rating at 480 VAC makes it especially useful where a simple, dependable molded-case breaker is preferred over a more complex adjustable-trip design.
  
• For replacement work, use the full PDG23M0150TFFL catalog number rather than assuming another 150A breaker is interchangeable. Check the frame, number of poles, voltage, interrupting ratings, trip characteristics, terminals, and dimensions against those of the existing equipment. Getting those details right is what matters when you're trying to find a breaker that fits the application.