PDG23M0200TFFL - 200 Amp Circuit Breaker

PDG23M0200TFFL - 200 Amp Circuit Breaker

The Eaton PDG23M0200TFFL is a 200-amp, 3-pole molded case circuit breaker from the Power Defense line. It is a Frame 2 breaker with a 65 kA interrupting rating at 480 VAC and a fixed thermomagnetic trip. Load-side terminals are included. This configuration is commonly suited to your commercial and industrial electrical systems where three-phase circuit protection is required. One of the advantages of the fixed-trip design is its simplicity. There are no electronic trip settings to configure, making it a straightforward choice when the application calls for these specific ratings. For replacement jobs, check the complete PDG23M0200TFFL part number along with the amperage, number of poles, frame, trip type, interrupting rating, and terminal setup. Breakers with a similar appearance may have very different electrical ratings.

Key Features and Benefits

• 200A, 3-pole configuration for compatible three-phase applications
• 65kA A.I.C. rating at 480VAC for applications requiring this level of fault-current interruption
• Fixed thermomagnetic trip with no electronic trip settings to program
• Power Defense Frame 2 molded case design
• Supplied with load-side terminals
• Maximum voltage rating of 600VAC
• Suitable for new installations or replacement applications when all specifications match
• Globally rated design with recognized electrical certifications

Technical Specifications

• Manufacturer: Eaton
  
• Part Number: PDG23M0200TFFL
  
• Product Line: Power Defense
  
• Breaker Type: Molded Case Circuit Breaker
  
• Frame: Frame 2
  
• Number of Poles: 3
  
• Amp Rating: 200A
  
• A.I.C. Rating: 65kA at 480VAC
  
• Maximum Voltage: 600VAC
  
• Trip: Fixed
  
• Trip Technology: Thermomagnetic
  
• Terminals: Load Side
  
• Approx. Height: 6.0 in.
  
• Approx. Width: 4.12 in.
  
• Approx. Depth: 3.5 in.
  

Material Compliance and Certifications

• The Eaton PDG23M0200TFFL carries several recognized certifications and compliance designations, including:
  • UL 489
  • CSA
  • IEC 60947-2
  • CCC Marked
  • RoHS Compliant
• These certifications can be important when matching a breaker to project specifications or equipment requirements. Always check the requirements for the actual installation, since certification alone does not determine whether a breaker is compatible with a particular electrical system.

Where It Works Best

• The PDG23M0200TFFL is intended for applications requiring a 200A, 3-pole molded-case circuit breaker with a 65kA interrupting rating at 480VAC. It can be a good match for compatible commercial power distribution equipment, industrial electrical systems, manufacturing facilities, and other three-phase installations.