Q2L3225H - 225 Amp Circuit Breaker

Q2L3225H - 225 Amp Circuit Breaker

When you’re replacing a breaker in an existing electrical system, the small details matter. The Q2L3225H is a 225-amp, 3-pole thermal-magnetic circuit breaker in the Q2L series, rated 22kAIC at 240VAC. It has a non-interchangeable trip unit along with lug terminals on both the line and load sides. That line-and-load lug configuration is an especially useful detail to check when matching the breaker to existing equipment. The Q2L3225H measures approximately 6.5 inches high, 4.5 inches wide, and 3.13 inches deep. For legacy equipment that calls for this particular configuration, it provides the familiar form, fit, and function needed to keep an existing system in service. Simply put, this is a breaker built to last and intended for applications where the Q2L3225H specifications match the original equipment requirements.

Key Features and Benefits

• 225-amp rating for equipment designed around a 225A breaker.
• Three-pole configuration for compatible three-pole electrical applications.
• Thermal-magnetic operation provides overcurrent protection through thermal and magnetic trip characteristics.
• Rated 22kAIC at 240VAC.
• Non-interchangeable trip unit provides a fixed trip configuration.
• Lug terminals on both the line and load sides are an important point to verify when replacing an existing breaker.
• Q2L type for applications designed to accommodate this breaker configuration.
• Clearly defined dimensions help simplify physical fit checks in existing equipment.
• Built to last when properly installed and used within its specified electrical ratings.

Technical Specifications

• Part Number: Q2L3225H
  
• Type: Q2L
  
• Breaker Type: Thermal Magnetic
  
• Amperage: 225A
  
• Poles: 3
  
• A.I.C. Rating: 22kAIC at 240VAC
  
• Trip Unit: Non-Interchangeable
  
• Line Side: Lug Terminals
  
• Load Side: Lug Terminals
  
• Dimensions:
  • Height: 6.5 in.
  • Width: 4.5 in.
  • Depth: 3.13 in.

Material Compliance and Certifications

• Material-compliance declarations and specific certification or agency-listing information were not included in the available specifications for the Q2L3225H. If your application requires a particular certification, listing, or material-compliance standard, confirm those requirements against the markings on the individual breaker and the appropriate technical documentation.

Where It Works Best

• The Q2L3225H is primarily suited to existing or legacy electrical equipment that requires this specific breaker configuration. It’s a practical fit when you need to match a 225A, 3-pole Q2L thermal magnetic breaker with a 22kAIC rating at 240VAC, especially when the application calls for lugs on both the line and load sides.