QBHGFT1025 - 25 Amp, GFCI (5mA) Circuit Breaker

QBHGFT1025 - 25 Amp, GFCI (5mA) Circuit Breaker

The QBHGFT1025 is a 25-amp, 1-pole bolt-on GFCI circuit breaker for applications requiring both standard circuit protection and 5 mA ground-fault protection. It's a QBHGF-type thermal-magnetic breaker, so it protects against overloads and short circuits while the built-in GFCI function monitors for potentially hazardous ground faults. The breaker is rated at 22 kA at 120/240 VAC and measures 3.19 inches high by 1 inch wide by 3 inches deep. That 1-inch width keeps the breaker relatively compact, which matters when you're working inside a panel where space is already limited. For maintenance crews, electricians, and facility personnel replacing an existing breaker, the QBHGFT1025 is worth considering when the job specifically calls for a 25A, single-pole, bolt-on QBHGF breaker with 5mA GFCI protection. As with any circuit breaker replacement, check the full part number and electrical specifications, not just the amperage, to ensure it matches the equipment.

Key Features and Benefits

• 25A single-pole configuration for circuits requiring a 25A breaker.
• 5mA GFCI protection helps protect against hazardous ground-fault current.
• Thermal-magnetic operation protects both overload and short-circuit conditions.
• 22 kA AIC at 120/240 VAC provides the interrupting capacity required for applications with this specified fault-current rating.
• Bolt-on mounting provides a secure connection in compatible panel equipment.
• At only 1 inch wide, the breaker doesn't take up more panel space than necessary.
• Combines overcurrent, short-circuit, and ground-fault protection in one breaker.

Technical Specifications

• Part Number: QBHGFT1025
  
• Type: QBHGF
  
• Poles: 1
  
• Amperage: 25A
  
• Voltage: 120/240 VAC
  
• AIC Rating: 22kA @ 120/240 VAC
  
• Protection Type: Thermal-Magnetic
  
• Ground-Fault Protection: 5mA GFCI
  
• Mounting: Bolt-On
  
• Dimensions:
  • Height: 3.19 in.
  • Width: 1.0 in.
  • Depth: 3.0 in.

Material Compliance and Certifications

• Compliance, listing, certification, and material information should be confirmed using the labeling and manufacturer documentation supplied with the specific QBHGFT1025 breaker. This is particularly important for replacement work, where the breaker must meet the requirements of the panel, equipment, application, and applicable electrical codes.

Where It Works Best

• The QBHGFT1025 is a good fit for compatible electrical installations that specifically require a 25-amp, 1-pole bolt-on GFCI breaker. It may be used in commercial, institutional, industrial, and other qualifying electrical applications where 5 mA ground-fault protection and a 22 kA interrupting rating at 120/240 VAC are required.