QBHW1035 - 35 Amp Circuit Breaker

QBHW1035 - 35 Amp Circuit Breaker

The QBHW1035 is a 35-amp, single-pole thermal-magnetic circuit breaker with a bolt-on connection. Rated at 22kA at 120VAC, it’s intended for compatible equipment that requires these electrical ratings and the QBHW mounting configuration. Thermal-magnetic protection allows the breaker to respond to two common circuit problems: overloads that build up over time and the high current associated with a short circuit.

This breaker is also HACR rated, an important detail when you’re working with compatible heating, air-conditioning, or refrigeration equipment. Physically, it measures 3.41 inches high, 1 inch wide, and 2.92 inches deep, so it takes up relatively little panel space. The QBHW1035 carries a 40°C rating.

Replacing an existing breaker? Match more than the amp rating. The QBHW type, single-pole design, bolt-on connection, voltage, interrupting rating, and physical size all matter. A breaker can look right at first glance and still be wrong for the equipment.

Key Features and Benefits

• 35A, 1-pole configuration for applications calling for these specific ratings.
• 22 kA AIC at 120 VAC provides the specified short-circuit interrupting capacity.
• Thermal-magnetic operation provides overload and short-circuit protection.
• Bolt-on mounting gives the breaker a secure connection in compatible equipment.
• HACR rated for qualifying heating, air-conditioning, and refrigeration applications.
• At only 1 inch wide, it maintains a compact footprint.
• 40°C rating for applications designed around this temperature specification.

Technical Specifications

• SpecificationDetails
  
• Part Number: QBHW1035
  
• Type: QBHW
  
• Amperage: 35A
  
• Poles: 1
  
• Voltage: 120VAC
  
• A.I.C. Rating: 22kA at 120VAC
  
• Trip Type: Thermal Magnetic
  
• Mounting: Bolt-On
  
• HACR Rated: Yes
  
• Temperature Rating: 40°C
  
• Dimensions:
  • Height: 3.41 in.
  • Width: 1.0 in.
  • Depth: 2.92 in.

Material Compliance and Certifications

• Available product information identifies the QBHW1035 as HACR-rated and specifies a 40°C rating. No additional material compliance information or certifications were included in the provided specifications.
• If a particular listing, certification, or material standard is required for the job, confirm it from the breaker markings and appropriate manufacturer documentation rather than assuming compliance.
  

Where It Works Best

• The QBHW1035 is a good match for compatible electrical distribution equipment designed for QBHW bolt-on circuit breakers. Its 35-amp, single-pole configuration is intended for circuits requiring those ratings, while the 22kA AIC at 120VAC makes it appropriate where that level of interrupting capacity is specified.