QBP22150TP - 150 Amp Circuit Breaker
- 150 Amp
- 10k @ 120/240VAC
- 2 Pole
Purchase Options:
QBP22150TP - 150 Amp Circuit Breaker Description
QBP22150TP - 150 Amp Circuit Breaker
The QBP22150TP is a 2-pole, 150 Amp thermal magnetic circuit breaker rated for your 120/240VAC systems with a 10kA interrupting capacity. It is equipped with a factory-installed non-interchangeable trip unit, 1/4-20" studs on the line side, and lug terminals on the load side. These connection points should be verified against the equipment before installation. Thermal magnetic breakers use two methods of protection. The thermal element responds to sustained overload conditions, while the magnetic element reacts to higher fault currents. Together, they help you to protect electrical equipment and conductors from damage caused by overcurrent.
Key Features and Benefits
- Part Number: QBP22150TP
- Type QBP Thermal Magnetic Circuit Breaker: Type QBP thermal magnetic circuit breaker
- 2-Pole Construction: 2-pole construction
- 150 Amp Current Rating: 150 Amp current rating
- 120/240VAC Voltage Rating: 120/240VAC voltage rating
- 10kA Interrupting Capacity: 10kA interrupting capacity
- Factory-Installed Non-Interchangeable Trip Unit: Factory-installed non-interchangeable trip unit
- Line-Side Connections: 1/4-20" line-side studs
- Load-Side Connections: Load-side lug terminals
Technical Specifications
-
Part Number: QBP22150TP
-
Type: QBP
-
Poles: 2
-
Amperage: 150A
-
Voltage: 120/240VAC
-
A.I.C. Rating: 10kA @ 120/240VAC
-
Trip Unit: Non-Interchangeable
-
Protection: Thermal Magnetic
-
Line Connection: 1/4-20" Studs
-
Load Connection: Lug Terminals
-
Dimensions:
- Height: 6.5 in.
- Width: 3.0 in.
- Depth: 3.13 in.
Material Compliance and Certifications
- Installation Requirements: Install only in equipment designed for this breaker type and electrical rating. Installation should comply with applicable electrical codes, local regulations, and the equipment manufacturer's instructions.
- Compatibility Confirmation: Confirm compatibility before placing the breaker into service.
Where It Works Best
- This breaker is commonly used in commercial and industrial electrical distribution systems that require a 150 Amp, 2-pole thermal magnetic circuit breaker. It can be used where the electrical ratings, terminal configuration, and breaker type match the requirements of the installation.
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Square D® is a registered trademark of Schneider Electric. Products sold are surplus, used, or refurbished and are NOT supplied by Schneider Electric or its affiliates.
Specifications
- Width:3.0
- Height:6.5
- Depth:3.13
- Poles:2
- Amperes:150
- A.I.C. Rating & Volts:10k @ 120/240VAC
- Type:QBP
- Approx Dimensions:3.00"W x 6.50"L x 3.13"D
- Additional Notes:Thermal Magnetic Circuit Breaker with Non-Interchangeable Trip Unit. This Breaker Has 1/4-20" Studs On The Line Side, And Lug Terminals On The Load Side
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).