NCLR35 - 35Amp Fuse

NCLR35 - 35Amp Fuse

The NCLR35 is a 35-amp, 600 VAC Class R fuse for applications that require time-delay and current-limiting protection. It has a 200 kA interrupting rating at 600 VAC, giving you the fault-current rating needed for demanding electrical systems when properly applied. Because it's a time-delay fuse, the NCLR35 can handle temporary current increases without operating unnecessarily, while still providing overcurrent protection when needed. This cartridge-style, non-indicating fuse measures 3 inches long and 0.81 inches wide and deep. If you're replacing an existing NCLR35 or matching a fuse to equipment that specifies a 35A Class R fuse, these ratings and dimensions make it easier to confirm you have the right part.

Key Features and Benefits

• 35 amp rating for equipment requiring a 35A Class R fuse.
• Rated for electrical systems up to 600 VAC.
• 200 kA A.I.C. at 600 VAC for high fault-current applications.
• Time-delay design accommodates temporary current surges.
• Current-limiting Class R construction helps limit fault current when correctly applied.
• Cartridge-style, non-indicating design for compatible fuse holders and equipment.
• Measures 3.0" x 0.81" x 0.81".

Technical Specifications

• Type: NCLR
  
• Amperage: 35 A
  
• Voltage: 600 VAC
  
• A.I.C. Rating: 200 kA @ 600 VAC
  
• Fuse Class: Class R
  
• Operation: Time-Delay
  
• Current-Limiting: Yes
  
• Style: Cartridge
  
• Indicator: Non-Indicating
  
• Dimensions:
  • Height: 3.0 in.
  • Width: 0.81 in.
  • Depth: 0.81 in.

Material Compliance and Certifications

No specific material compliance information or certification listings were included in the supplied specifications for the NCLR35. If your installation requires a particular certification or compliance standard, verify that requirement against the applicable product documentation before installation.

Where It Works Best

The NCLR35 makes sense anywhere the equipment specifications call for a 35 amp, 600 VAC Class R time-delay fuse with a 200 kA interrupting rating. The time-delay characteristic is particularly useful in compatible equipment where short periods of higher current can occur during startup.

For replacement work, don't rely on amperage alone. Check the fuse class, voltage rating, interrupting rating, time-delay requirement, and physical dimensions against the equipment specifications and the fuse being replaced. That quick comparison can help confirm whether the NCLR35 is the correct match.