CN35BN2 - Cutler-Hammer Contactor Description
CN35BN2 - Cutler-Hammer Contactor
The CN35BN2 Eaton CN35 contactor is a 20 Amp, 3-pole motor control contactor used in everyday industrial and commercial control setups where motors need to be switched on and off through a control circuit. You’ll usually find this kind of contactor in HVAC equipment, pump systems, small machinery, and general motor control panels, where dependable switching is part of normal day-to-day operation.
It runs on a 120V AC coil, which is standard in many control circuits. With its 3-pole, 20-amp configuration, it handles typical motor switching for three-phase applications or other control configurations depending on how the system is wired. In practical use, it’s not complicated — it’s just a familiar, reliable piece that electricians install when they need something that fits into an existing CN35 system without extra adjustments.
At the end of the day, this contactor is used where consistency matters more than anything else — same footprint, same function, same straightforward operation in CN35-based control systems.
Key Features and Benefits
- 20A, 3-pole motor control contactor for industrial use
- Designed for Eaton CN35 control systems
- 120V AC coil for common control circuit compatibility
- Open-type design for enclosure mounting
- Used in HVAC, pumps, and light industrial machinery
- Suitable for three-phase motor switching
- Common replacement part in existing CN35 setups
- Fits existing control panel layouts without changes
- Straightforward electromechanical switching design
- Built for everyday motor control applications
Technical Specifications
- Catalog Number: CN35BN2
- Product Type: Motor control contactor
- Series: CN35
- Amperage Rating: 20A
- Poles: 3
- Coil Voltage: 120V AC
- Mounting Type: Open (enclosure required)
- Dimensions: 3.88 in H x 2.0 in W x 3.49 in D
- Control Type: Electromechanical contactor
Material Compliance and Certifications
The CN35BN2 Eaton contactor is intended for use in industrial motor control systems and must be installed by qualified electrical personnel. Installation should follow applicable electrical codes and manufacturer guidelines for safe operation within a properly rated enclosure.
Where It Works Best
- HVAC systems and air handling units
- Pump control systems
- Small industrial machinery
- Motor control panels and MCC setups
- Commercial building control systems
- Three-phase motor switching applications
- Replacement of existing CN35 contactors
- Industrial maintenance and repair work
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Eaton®, Cutler-Hammer®, Westinghouse®, Challenger®, Bussmann®, Crouse-Hinds®, and Cooper® are registered trademarks of Eaton Corporation plc. Products sold are surplus, used, or refurbished and are NOT supplied by Eaton Corporation plc or its affiliates.
Specifications
- Width:2.0
- Height:3.88
- Depth:3.49
- Poles:3
- Amperes:20
- Type:CN35
- Sub-Category:Contactor
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).