
D325NTR - 400A Safety Switch Description
D325NTR - 400A Safety Switch
When you're working with a 400-amp electrical system, a dependable disconnect is essential to the installation. The Square D D325NTR 400 Amp Fusible Safety Switch gives electricians and maintenance personnel a straightforward way to disconnect power from compatible equipment and circuits manually. Rated for 240V AC, this three-pole, general-duty safety switch is designed for applications where the right combination of amperage, fuse protection, and enclosure type matters.
The D325NTR uses a fusible, single-throw design that accepts 300V AC Class T fuses. When the correct fuses are installed, they provide overcurrent and short-circuit protection for the connected circuit. The switch itself provides manual isolation; it isn't a circuit breaker and doesn't automatically trip during an electrical fault. A quick-make, quick-break operating mechanism supports positive switching action, while the factory-installed neutral accommodates compatible four-wire configurations.
Key Features and Benefits
- 400 Amp Current Rating
- 240V AC Voltage Rating
- Three-Pole Configuration
- General-Duty Safety Switch
- Fusible Single-Throw Design
- 300V AC Class T Fuse Compatibility
- NEMA 3R Rainproof Enclosure
- Suitable for Indoor and Outdoor Applications
- Factory-Installed Neutral
- Four-Wire Configuration
Technical Specifications
-
Manufacturer: Square D by Schneider Electric
-
Part Number: D325NTR
-
Product Category: Safety Switch
-
Switch Type: Fusible Single-Throw
-
Duty Rating: General Duty
-
Amperage: 400 Amps
-
Voltage Rating: 240V AC
-
Number of Poles: 3
-
Phase: Three-Phase
-
Wiring Configuration: 4-Wire
-
Neutral: Factory Installed
-
Enclosure Rating: NEMA Type 3R
-
Fuse Compatibility: 300V AC Class T Fuses
-
Short-Circuit Current Rating: 100 kA with the specified Class T fuse arrangement
-
Motor Rating: 50 HP at 240V AC, 60 Hz, Three-Phase
-
Operating Method: Manual
-
Operating Mechanism: Quick-Make, Quick-Break
-
Mounting Type: Surface Mount
-
Electrical Connections: Lugs
-
Conductor Material: Copper or Aluminum, subject to terminal requirements
-
Height: 30.63 inches
-
Width: 21.38 inches
-
Depth: 10.13 inches
Material Compliance and Certifications
The D325NTR is UL listed under file E2875. Square D general-duty safety switches are manufactured in accordance with applicable requirements of UL 98, the standard for enclosed and dead-front switches, and NEMA KS 1, which addresses enclosed switching equipment.
Where It Works Best
- Outdoor Electrical Disconnect Applications
- Commercial Building Electrical Systems
- Residential Electrical Equipment Installations
- Three-Phase Power Distribution
- HVAC Equipment Disconnects
- Building Maintenance Projects
- Exterior Electrical Equipment Areas
- Indoor Electrical Rooms
- Compatible Motor Disconnect Applications
- Existing Safety Switch Replacement
- Facility Electrical Maintenance
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Square D® is a registered trademark of Schneider Electric. Products sold are surplus, used, or refurbished and are NOT supplied by Schneider Electric or its affiliates.
Specifications
- Height:30.63
- Width:21.38
- Depth:10.13
- Poles:3
- Amperes:400
- A.I.C. Rating & Volts:240
- Sub-Category:SAFETY SWITCH
Returns are easy
You may return unused items within 30 days of delivery for a refund, subject to our Return Policy.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).
