HU361DSWA - 30A Safety Switch Description
HU361DSWA - 30A Safety Switch
Replacing a safety switch isn't always as simple as matching the amperage. There's the voltage to consider, the number of poles, and, of course, whether the replacement will fit where the old switch was installed.
A safety switch has a simple job: provide a means of disconnecting equipment from electrical power. But selecting the right one takes a little homework. Along with the basic ratings, you'll want to check the enclosure type, whether the switch is fusible or non-fusible, and the installation requirements for the equipment it serves.
Key Features and Benefits
- 30-Amp Current Rating
- 600-Volt Rating
- Three-Pole Configuration
- Specific Enclosure Dimensions
- Useful for Existing Electrical Systems
- Helps Narrow Down Replacement Choices
- Clear Model Identification
Technical Specifications
-
Part Number: HU361DSWA
-
Product Category: Safety Switch
-
Amperage: 30 Amps
-
Voltage Rating: 600 Volts
-
Number of Poles: 3
-
Height: 16.87 inches
-
Width: 8.92 inches
-
Depth: 5.11 inches
-
Overall Dimensions (H × W × D): 16.87 × 8.92 × 5.11 inches
Material Compliance and Certifications
When you're replacing electrical equipment, the ratings on the label are only part of the picture. The switch also needs to be appropriate for its surroundings and the electrical system it's connected to.
Electrical systems are often built with years of service in mind. Keeping them operating as intended means using properly matched components, following installation requirements, and checking the condition of the equipment already in place.
Where It Works Best
The HU361DSWA may be suitable for several types of electrical work, depending on the requirements of the installation.
- Commercial Electrical Systems
- Industrial Equipment Maintenance
- Safety Switch Replacement
- Certain Three-Phase Applications
- Older Electrical Installations
- Facility Repair Work
- Equipment Disconnect Locations
Use of Original Equipment Manufacturer (OEM) trademarks, names, and logos is for informational and identification purposes only. This does not imply any affiliation, sponsorship, endorsement, or approval by the original equipment manufacturer. CIRCUIT BREAKER SUPERSTORE® is an independent reseller and is not an authorized distributor, affiliate, or representative of any manufacturer. Manufacturer warranties do not apply unless expressly stated. All trademarks and registered trademarks are the property of their respective owners.
Square D® is a registered trademark of Schneider Electric. Products sold are surplus, used, or refurbished and are NOT supplied by Schneider Electric or its affiliates.
Specifications
- Height:16.87
- Width:8.92
- Depth:5.11
- Poles:3
- Amperes:30
- A.I.C. Rating & Volts:600
- Sub-Category:SAFETY SWITCH
- Additional Notes:Discontinued by the Manufacturer
Returns are easy
You may return unused items within 30 days of delivery for a full refund.
FREE ground shipping on breaker orders over $100 and all other items with orders over $500.
Shipping charges are Prepaid and Allowed on UPS Ground orders for all other products on orders over $500.00, again only when shipping within the lower 48 continental United States, provided the product(s) can safely ship UPS Ground.
If the product cannot safely ship via UPS Ground, or is too heavy to ship UPS Ground, then the product will be shipped via freightliner at buyer's expense.
CIRCUIT BREAKER SUPERSTORE® offers one to five day delivery in the United States. The variation depends on the chosen shipping speed and the warehouse location for the product(s).
Same Day Shipping
We strive to ship out your items within one business day.
In rare circumstances, CIRCUIT BREAKER SUPERSTORE® may reserve up to 5 business days to complete shipment. Feel free to contact us if your order is time sensitive.
CIRCUIT BREAKER SUPERSTORE® provides a limited 1-year warranty on both new and reconditioned products. Rest assured, all products are authentic OEM (original equipment manufacturer).